vga/keyboard it goes through the bios boot stuff and just stops or asks me to put a boot media in the drive (its already present) if using disk, just ignores the usb stick
the boot process doesn't get far enough to enter that or any setting Nick Upson, Telensa Ltd, Senior Operations Network Engineer direct +44 (0) 1799 533252, support hotline +44 (0) 1799 399200 On 22 October 2014 15:47, Matt Smith <mgsm...@netgate.com> wrote: > > Are you trying to boot using a VGA/keyboard or connected to a serial port? > Do you see anything happening on the console? Or nothing at all? > > As someone mentioned previously, kern.cam.boot_delay needs to be set to a > higher value when booting over USB. If you use a memstick image instead of > the LiveCD, this is set automatically. > > > On Oct 22, 2014, at 9:10 AM, Nick Upson <n...@telensa.com> wrote: > > well the filename is pfSense-LiveCD-2.1.5-RELEASE-i386-20140825-0744.iso > so I don't think thats the problem > > Nick Upson, Telensa Ltd, Senior Operations Network Engineer > direct +44 (0) 1799 533252, support hotline +44 (0) 1799 399200 > > On 22 October 2014 14:55, Ryan Coleman <ryan.cole...@cwis.biz> wrote: > >> Stupid question time: >> >> You're not trying to put a 64-bit installer into a 32-bit system, are you? >> That error was common when I didn't pay attention to my CPU type and had >> a mix of 32- and 64-bit machines. >> >> >> >> On 10/22/2014 6:14 AM, Nick Upson wrote: >> >> Hi >> >> Thanks for that link, none of it seems to apply as the box is not >> booting from the media at all, says there is not a bootable media present >> >> Nick Upson, Telensa Ltd, Senior Operations Network Engineer >> direct +44 (0) 1799 533252 <%2B44%20%280%29%201799%20533252>, support >> hotline +44 (0) 1799 399200 <%2B44%20%280%29%201799%20399200> >> >> On 21 October 2014 17:02, compdoc <comp...@hotrodpc.com> wrote: >> >>> > I can boot from usb that has a different disto (centos) >>> >>> >>> Have you had a look at: >>> >>> >>> https://doc.pfsense.org/index.php/Boot_Troubleshooting >>> >>> >>> I've seen some people that have had to set the kern.cam.boot_delay >>> >>> >> >> >> >> _______________________________________________ >> List mailing >> listList@lists.pfsense.orghttps://lists.pfsense.org/mailman/listinfo/list >> >> >> >> _______________________________________________ >> List mailing list >> List@lists.pfsense.org >> https://lists.pfsense.org/mailman/listinfo/list >> > > _______________________________________________ > List mailing list > List@lists.pfsense.org > https://lists.pfsense.org/mailman/listinfo/list > > > > _______________________________________________ > List mailing list > List@lists.pfsense.org > https://lists.pfsense.org/mailman/listinfo/list >
_______________________________________________ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list
