Here is what I'm seeing: http://imgur.com/bh3hBwt
I reloaded a new 2.2.1 image and I get the same thing. If I put a 4 gb card with a new 2.2 image in it it works fine. If I put a different 4 GB card with an older 2.0.3 version it works fine. Is there an issue with the 2g image? On Tue, Mar 17, 2015 at 11:49 AM, Jim Thompson <j...@netgate.com> wrote: > Unless you've changed it, the baud rate on an Alix is 38400 > https://doc.pfsense.org/index.php/Console_Types > > Jim > > On Mar 17, 2015, at 4:45 PM, Jeremy Bennett <jbenn...@hikitechnology.com> > wrote: > > So I recently resolved my serial port issue and was able to start reviving > this Alix box. > > Made sure that the firmware was .99h > > Wrote the new pfsense 2.2 2 GB image to a CF card. > > Slotted it into the Alix - terminal set to 115200 Baud rate, data was 8 > bit, parity is none and stop is 1 bit - all per the documentation. > > (for reference I'd just done this on another unit and everything worked > great) > > On this particular unit, the console text appears to be in a cyrillic or > greek typeface... is that a problem? > > I can login to the normal GUI and all appears fine. > > Any ideas on why the console is looking this way? Will this be an issue > down the road, or should I just leave well enough alone? > > Mahalo, > Jeremy > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold >
_______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold