Hi All, Thanks for the help - I was able to check the files using DISM, they were there and for some reason it started to work after I checked..
I was also reading problems with both 10240 and 10586. Not sure what got it working exactly.. From: [email protected] [mailto:[email protected]] On Behalf Of Mawdsley R. Sent: Tuesday, December 15, 2015 4:34 AM To: [email protected] Subject: [mssms] RE: Boot Image not loading Powershell I'm going to give a very vague reply.. But I'm pretty sure I saw someone else having this issue on a forum with this version of winpe. Their fix was to update to the latest ADK and remake the wim's... however that latest wim has its own problems which can fail TS's completely and isn't advised to be used with SCCM. Might need to wait it out till next version is released. Rich From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Alldredge, Chace Sent: 14 December 2015 18:40 To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Boot Image not loading Powershell Adding more info... the OS version of the boot image is 10.0.10240.16384 [cid:[email protected]] I tried to remove the component & update DP, then read & update DP. No luck. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Alldredge, Chace Sent: Monday, December 14, 2015 9:38 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Boot Image not loading Powershell Correct, in WinPE/F8 troubleshooting mode, powershell is unrecognized/unavailable. I've updated the DP's numerous times. :( That's all I've done so far for troubleshooting... From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Daniel Ratliff Sent: Monday, December 14, 2015 9:32 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Boot Image not loading Powershell Is the issue that you load up WinPE and PowerShell is not available? Did you update the DPs after adding those components? Daniel Ratliff From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Alldredge, Chace Sent: Monday, December 14, 2015 9:13 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] Boot Image not loading Powershell Hi All, I am trying to setup a Boot Image to load a prestart script that's in Powershell. Under Optional Components, all the necessary components are enabled, shown below: [cid:[email protected]] I'm not sure where I can find logs for these sort of things that aren't loading properly. Please help! :) The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
