My Meraki MR-12 is now in its last 30 days of Meraki approved existence.. So, I'll try and find some time in the next couple of months to get OpenWRT on there. OpenWRT is a bit more involved than DD-WRT, but it's not going to be much more involved than rooting an Android device, from what I can see. Regards,
ASB http://XeeMe.com/AndrewBaker Providing Expert Technology Consulting Services for the SMB market… GPG: 1AF3 EEC3 7C3C E88E B0EF 4319 8F28 A483 A182 EF3A Sent with Mixmax On Mon, Mar 14, 2016 at 9:59 PM, J Harris < [email protected] > wrote: It appears OpenWRT needs to be loaded from a Linux box at least on first reading that is how it appears. Also the Meraki instructions to me are not as clear as if I went with DD-WRT. The Meraki units need a TFTP server/client setup with an static IP address. Meraki really wanted to make it hard to change things on the “free” units. Since the Meraki unit I have is not yet supported…Not like the Linksys devices which will allow you to grab any BIN to flash when you told it where to look. Since I have a very old WRT54G that I retired after it stopped passing packs from inside to outside I will try flashing that unit with DD-WRT and see if it starts working again. Jon From: [email protected] [mailto: listsadmin@lists. myitforum.com ] On Behalf Of Micheal Espinola Jr Sent: Monday, March 14, 2016 9:40 PM To: [email protected] Subject: Re: [NTSysADM] DD-WRT on Meraki router What about it will be more trouble than its worth to go OpenWRT? I'm a DD-WRT user, so I am unfamiliar with OpenWRT pitfalls. -- Espi On Mon, Mar 14, 2016 at 5:19 PM, J Harris < [email protected] > wrote: Alright I finally got my model number and it is unsupported at this time on DD-WRT but is supported on OpenWRT. It looks like that will be more trouble than it is worth to me to go that route. Jon From: [email protected] [mailto: listsadmin@lists. myitforum.com ] On Behalf Of J Harris Sent: Monday, March 14, 2016 7:38 PM To: [email protected] Subject: [NTSysADM] DD-WRT on Meraki router It appears that DD-WRT works on some Meraki routers. But which build is the question. I would have to do a little more research to find the model number for the “free” one I have but has anyone used build 6999 20070508 on it? Thank you!
