Ross,
I observed that sometimes the testOnDemandRTSPServer increases the delay of the
mpegts/rtp stream. It went all well, but suddenly, the server keeps increasing
its memory usage. In this case, the player slows down, and the delay increases.
The delay of the video could be up to 1 minute. The resident memory used by the
server could reach ~20 megabytes(usually it only cost ~1 megabyte). It is hard
for me to inspect the internal memory usage of the server. Can you shed some
light on the issue?
Thanks,
Lan Zang(Sander)
________________________________
From: Ross Finlayson <[email protected]>
To: LIVE555 Streaming Media - development & use <[email protected]>
Sent: Sunday, February 17, 2013 2:15 PM
Subject: Re: [Live-devel] SimpleRTPSource and RTCP
I tested the testProgs/testOnDemandRTSPServer. It does not have the odd port
for RTCP, (i.e only 1234 port is open).
OK, I misunderstood your question. I thought you were asking about the
*output* from the RTSP server.
But yes, you're right. We should really be creating a "RTCPInstance" as well
as the "SimpleRTPSource". But in this case it doesn't really matter, because
we don't need accurate 'presentation times' for these packets.
Ross Finlayson
Live Networks, Inc.
http://www.live555.com/
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel
