With my initial testing, ODP-DPDK is working perfectly with mellanox drivers. Thank you
P Gyanesh Kumar Patra On Thu, Nov 9, 2017 at 2:18 PM, Maxim Uvarov <maxim.uva...@linaro.org> wrote: > Nice to see it working. I think we did not yet tested it with Mellanox > drivers. > > For linux-generic refer to .travis.yaml or ./scripts/build-pktio-dpdk > scripts. Also all required steps are in README. > > Maxim. > > On 11/09/17 14:47, Elo, Matias (Nokia - FI/Espoo) wrote: > > Hi Gyanesh, > > > > Pretty much the same steps should also work with odp linux-generic. The > main difference is configure script. With linux-generic you use > '--with-dpdk-path=<dpdk_path>' option and optionally > --enable-dpdk-zero-copy flag. The supported dpdk version is v17.08. > > > > -Matias > > > >> On 9 Nov 2017, at 10:34, gyanesh patra <pgyanesh.pa...@gmail.com> > wrote: > >> > >> Hi Maxim, > >> Thanks for the help. I managed to figure out the configuration error > and it > >> works fine for "ODP-DPDK". The MLX5 pmd was not included properly. > >> > >> But regarding "ODP" repo (not odp-dpdk), do i need to follow any steps > to > >> be able to use MLX ??? > >> > >> > >> P Gyanesh Kumar Patra > >> > >> On Wed, Nov 8, 2017 at 7:56 PM, Maxim Uvarov <maxim.uva...@linaro.org> > >> wrote: > >> > >>> On 11/08/17 19:32, gyanesh patra wrote: > >>>> I am not sure what you mean. Can you please elaborate? > >>>> > >>>> As i mentioned before I am able to run dpdk examples. Hence the > drivers > >>>> are available and working fine. > >>>> I configured ODP & ODP-DPDK with "LDFLAGS=-libverbs" and compiled to > >>>> work with mellanox. I followed the same while compiling dpdk too. > >>>> > >>>> Is there anything i am missing? > >>>> > >>>> P Gyanesh Kumar Patra > >>> > >>> > >>> in general if CONFIG_RTE_LIBRTE_MLX5_PMD=y was specified then it has to > >>> work. I think we did test only with ixgbe. But in general it's common > code. > >>> > >>> "Unable to init any I/O type." means it it called all open for all > pktio > >>> in list here: > >>> ./platform/linux-generic/pktio/io_ops.c > >>> > >>> and setup_pkt_dpdk() failed for some reason. > >>> > >>> I do not like allocations errors in your log. > >>> > >>> Try to compile ODP with --enable-debug-print --enable-debug it will > make > >>> ODP_DBG() macro work and it will be visible why it does not opens > pktio. > >>> > >>> Maxim > >>> > >>> > >>>> > >>>> On Wed, Nov 8, 2017 at 5:22 PM, Maxim Uvarov <maxim.uva...@linaro.org > >>>> <mailto:maxim.uva...@linaro.org>> wrote: > >>>> > >>>> is Mellanox pmd compiled in? > >>>> > >>>> Maxim. > >>>> > >>>> On 11/08/17 17:58, gyanesh patra wrote: > >>>>> Hi, > >>>>> I am trying to run ODP & ODP-DPDK examples on our server with > >>>> mellanox 100G > >>>>> NICs. I am using the odp_l2fwd example. While running the example, > >>>> I am > >>>>> facing some issues. > >>>>> -> When I run "ODP" example using the if names given by kernel as > >>>>> arguments, I am not getting enough throughput.(the value is very > >>> low) > >>>>> -> And when I try "ODP-DPDK" example using port ID as "0,1", it > >>> can't > >>>>> create pktio. Whereas I am able to run the examples from "DPDK" > >>>>> repo with portID "0,1" for the same mellanox NICs. I tried running > >>>> with > >>>>> "81:00.0,81:00.1" and also with if-names too without any success. > >>>> Adding > >>>>> the whitelist using ODP_PLATFORM_PARAMS doesn't help either. > >>>>> > >>>>> Am I missing any steps to use mellanox NICs? OR is there a > >>>> different method > >>>>> to specify the device details to create pktio? > >>>>> I am providing the output of "odp_l2fwd" examples for ODP and > >>> ODP-DPDK > >>>>> repository here. > >>>>> > >>>>> The NICs being used: > >>>>> > >>>>> 0000:81:00.0 'MT27700 Family [ConnectX-4]' if=enp129s0f0 > >>> drv=mlx5_core > >>>>> unused= > >>>>> 0000:81:00.1 'MT27700 Family [ConnectX-4]' if=enp129s0f1 > >>> drv=mlx5_core > >>>>> unused= > >>>>> > >>>>> ODP l2fwd example run details: > >>>>> ------------------------------ > >>>>> root@ubuntu:/home/ubuntu/odp/test/performance# ./odp_l2fwd -i > >>>>> enp129s0f0,enp129s0f1 > >>>>> HW time counter freq: 2399999886 <tel:2399999886> > >>>> <(239)%20999-9886> hz > >>>>> > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishm.c:880:_odp_ishm_reserve():No huge pages, fall back to normal > >>>> pages. > >>>>> check: /proc/sys/vm/nr_hugepages. > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> PKTIO: initialized loop interface. > >>>>> PKTIO: initialized pcap interface. > >>>>> PKTIO: initialized ipc interface. > >>>>> PKTIO: initialized socket mmap, use export > >>>> ODP_PKTIO_DISABLE_SOCKET_MMAP=1 > >>>>> to disable. > >>>>> PKTIO: initialized socket mmsg,use export > >>>> ODP_PKTIO_DISABLE_SOCKET_MMSG=1 > >>>>> to disable. > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> > >>>>> ODP system info > >>>>> --------------- > >>>>> ODP API version: 1.15.0 > >>>>> ODP impl name: "odp-linux" > >>>>> CPU model: Intel(R) Xeon(R) CPU E5-2680 v4 > >>>>> CPU freq (hz): 3300000000 > >>>>> Cache line size: 64 > >>>>> CPU count: 56 > >>>>> > >>>>> > >>>>> CPU features supported: > >>>>> SSE3 PCLMULQDQ DTES64 MONITOR DS_CPL VMX SMX EIST TM2 SSSE3 FMA > >>>> CMPXCHG16B > >>>>> XTPR PDCM PCID DCA SSE4_1 SSE4_2 X2APIC MOVBE POPCNT TSC_DEADLINE > >>>> AES XSAVE > >>>>> OSXSAVE AVX F16C RDRAND FPU VME DE PSE TSC MSR PAE MCE CX8 APIC > >>>> SEP MTRR > >>>>> PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM > >>> PBE > >>>>> DIGTEMP TRBOBST ARAT PLN ECMD PTM MPERF_APERF_MSR ENERGY_EFF > >>>> FSGSBASE HLE > >>>>> AVX2 BMI2 ERMS INVPCID RTM LAHF_SAHF SYSCALL XD 1GB_PG RDTSCP > >>>> EM64T INVTSC > >>>>> > >>>>> CPU features NOT supported: > >>>>> CNXT_ID PSN ACNT2 BMI1 SMEP AVX512F LZCNT > >>>>> > >>>>> Running ODP appl: "odp_l2fwd" > >>>>> ----------------- > >>>>> IF-count: 2 > >>>>> Using IFs: enp129s0f0 enp129s0f1 > >>>>> Mode: PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> > >>>>> num worker threads: 32 > >>>>> first CPU: 24 > >>>>> cpu mask: 0xFFFFFFFF000000 > >>>>> > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >>> memory > >>>>> > >>>>> Pool info > >>>>> --------- > >>>>> pool 0 > >>>>> name packet pool > >>>>> pool type packet > >>>>> pool shm 11 > >>>>> user area shm 0 > >>>>> num 8192 > >>>>> align 64 > >>>>> headroom 128 > >>>>> seg len 8064 > >>>>> max data len 65536 > >>>>> tailroom 0 > >>>>> block size 8768 > >>>>> uarea size 0 > >>>>> shm size 72143104 > >>>>> base addr 0x7f5fc1234000 > >>>>> uarea shm size 0 > >>>>> uarea base addr (nil) > >>>>> > >>>>> pktio/socket_mmap.c:401:mmap_setup_ring():setsockopt(pkt mmap): > >>>> Invalid > >>>>> argument > >>>>> pktio/socket_mmap.c:496:sock_mmap_close():mmap_unmap_sock() > >>>> Invalid argument > >>>>> created pktio 1, dev: enp129s0f0, drv: socket > >>>>> Sharing 1 input queues between 16 workers > >>>>> Sharing 1 output queues between 16 workers > >>>>> created 1 input and 1 output queues on (enp129s0f0) > >>>>> pktio/socket_mmap.c:401:mmap_setup_ring():setsockopt(pkt mmap): > >>>> Invalid > >>>>> argument > >>>>> pktio/socket_mmap.c:496:sock_mmap_close():mmap_unmap_sock() > >>>> Invalid argument > >>>>> created pktio 2, dev: enp129s0f1, drv: socket > >>>>> Sharing 1 input queues between 16 workers > >>>>> Sharing 1 output queues between 16 workers > >>>>> created 1 input and 1 output queues on (enp129s0f1) > >>>>> > >>>>> Queue binding (indexes) > >>>>> ----------------------- > >>>>> worker 0 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 1 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 2 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 3 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 4 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 5 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 6 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 7 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 8 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 9 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 10 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 11 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 12 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 13 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 14 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 15 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 16 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 17 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 18 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 19 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 20 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 21 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 22 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 23 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 24 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 25 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 26 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 27 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 28 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 29 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> worker 30 > >>>>> rx: pktio 0, queue 0 > >>>>> tx: pktio 1, queue 0 > >>>>> worker 31 > >>>>> rx: pktio 1, queue 0 > >>>>> tx: pktio 0, queue 0 > >>>>> > >>>>> > >>>>> Port config > >>>>> -------------------- > >>>>> Port 0 (enp129s0f0) > >>>>> rx workers 16 > >>>>> tx workers 16 > >>>>> rx queues 1 > >>>>> tx queues 1 > >>>>> Port 1 (enp129s0f1) > >>>>> rx workers 16 > >>>>> tx workers 16 > >>>>> rx queues 1 > >>>>> tx queues 1 > >>>>> > >>>>> [01] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [02] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [03] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [04] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [05] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [06] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [07] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [08] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [09] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [10] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [11] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [12] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [13] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [14] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [15] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [16] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [17] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [18] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [19] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [20] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [21] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [22] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [23] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [24] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [25] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [26] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [27] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [28] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [29] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [30] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [31] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> [32] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>>> 96 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 64 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 32 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>>> 416 pps, 416 max pps, 0 rx drops, 0 tx drops > >>>>> > >>>>> > >>>>> ODP-DPDK example run details: > >>>>> ----------------------------- > >>>>> root@ubuntu:/home/ubuntu/odp-dpdk/test/common_plat/performance# > >>>> ./odp_l2fwd > >>>>> -i 0,1 > >>>>> EAL: Detected 56 lcore(s) > >>>>> EAL: Probing VFIO support... > >>>>> EAL: PCI device 0000:05:00.0 on NUMA socket 0 > >>>>> EAL: probe driver: 8086:1528 net_ixgbe > >>>>> EAL: PCI device 0000:05:00.1 on NUMA socket 0 > >>>>> EAL: probe driver: 8086:1528 net_ixgbe > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> ../linux-generic/_ishm.c:866:_odp_ishm_reserve():No huge pages, > >>>> fall back > >>>>> to normal pages. check: /proc/sys/vm/nr_hugepages. > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> PKTIO: initialized loop interface. > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> No crypto devices available > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >>> failed:Cannot > >>>>> allocate memory > >>>>> > >>>>> ODP system info > >>>>> --------------- > >>>>> ODP API version: 1.15.0 > >>>>> ODP impl name: odp-dpdk > >>>>> CPU model: Intel(R) Xeon(R) CPU E5-2680 v4 > >>>>> CPU freq (hz): 2400000000 > >>>>> Cache line size: 64 > >>>>> CPU count: 56 > >>>>> > >>>>> Running ODP appl: "odp_l2fwd" > >>>>> ----------------- > >>>>> IF-count: 2 > >>>>> Using IFs: 0 1 > >>>>> Mode: PKTIN_DIRECT, PKTOUT_DIRECT > >>>>> > >>>>> num worker threads: 32 > >>>>> first CPU: 24 > >>>>> cpu mask: 0xFFFFFFFF000000 > >>>>> > >>>>> mempool <packet pool>@0x7f1c7fe7de40 > >>>>> flags=10 > >>>>> pool=0x7f1c7e8ddcc0 > >>>>> phys_addr=0x17ffe7de40 > >>>>> nb_mem_chunks=1 > >>>>> size=8192 > >>>>> populated_size=8192 > >>>>> header_size=64 > >>>>> elt_size=2624 > >>>>> trailer_size=64 > >>>>> total_obj_size=2752 > >>>>> private_data_size=64 > >>>>> avg bytes/object=2752.000000 > >>>>> internal cache infos: > >>>>> cache_size=512 > >>>>> cache_count[0]=0 > >>>>> cache_count[1]=0 > >>>>> cache_count[2]=0 > >>>>> cache_count[3]=0 > >>>>> cache_count[4]=0 > >>>>> cache_count[5]=0 > >>>>> cache_count[6]=0 > >>>>> cache_count[7]=0 > >>>>> cache_count[8]=0 > >>>>> cache_count[9]=0 > >>>>> cache_count[10]=0 > >>>>> cache_count[11]=0 > >>>>> cache_count[12]=0 > >>>>> cache_count[13]=0 > >>>>> cache_count[14]=0 > >>>>> cache_count[15]=0 > >>>>> cache_count[16]=0 > >>>>> cache_count[17]=0 > >>>>> cache_count[18]=0 > >>>>> cache_count[19]=0 > >>>>> cache_count[20]=0 > >>>>> cache_count[21]=0 > >>>>> cache_count[22]=0 > >>>>> cache_count[23]=0 > >>>>> cache_count[24]=0 > >>>>> cache_count[25]=0 > >>>>> cache_count[26]=0 > >>>>> cache_count[27]=0 > >>>>> cache_count[28]=0 > >>>>> cache_count[29]=0 > >>>>> cache_count[30]=0 > >>>>> cache_count[31]=0 > >>>>> cache_count[32]=0 > >>>>> cache_count[33]=0 > >>>>> cache_count[34]=0 > >>>>> cache_count[35]=0 > >>>>> cache_count[36]=0 > >>>>> cache_count[37]=0 > >>>>> cache_count[38]=0 > >>>>> cache_count[39]=0 > >>>>> cache_count[40]=0 > >>>>> cache_count[41]=0 > >>>>> cache_count[42]=0 > >>>>> cache_count[43]=0 > >>>>> cache_count[44]=0 > >>>>> cache_count[45]=0 > >>>>> cache_count[46]=0 > >>>>> cache_count[47]=0 > >>>>> cache_count[48]=0 > >>>>> cache_count[49]=0 > >>>>> cache_count[50]=0 > >>>>> cache_count[51]=0 > >>>>> cache_count[52]=0 > >>>>> cache_count[53]=0 > >>>>> cache_count[54]=0 > >>>>> cache_count[55]=0 > >>>>> cache_count[56]=0 > >>>>> cache_count[57]=0 > >>>>> cache_count[58]=0 > >>>>> cache_count[59]=0 > >>>>> cache_count[60]=0 > >>>>> cache_count[61]=0 > >>>>> cache_count[62]=0 > >>>>> cache_count[63]=0 > >>>>> cache_count[64]=0 > >>>>> cache_count[65]=0 > >>>>> cache_count[66]=0 > >>>>> cache_count[67]=0 > >>>>> cache_count[68]=0 > >>>>> cache_count[69]=0 > >>>>> cache_count[70]=0 > >>>>> cache_count[71]=0 > >>>>> cache_count[72]=0 > >>>>> cache_count[73]=0 > >>>>> cache_count[74]=0 > >>>>> cache_count[75]=0 > >>>>> cache_count[76]=0 > >>>>> cache_count[77]=0 > >>>>> cache_count[78]=0 > >>>>> cache_count[79]=0 > >>>>> cache_count[80]=0 > >>>>> cache_count[81]=0 > >>>>> cache_count[82]=0 > >>>>> cache_count[83]=0 > >>>>> cache_count[84]=0 > >>>>> cache_count[85]=0 > >>>>> cache_count[86]=0 > >>>>> cache_count[87]=0 > >>>>> cache_count[88]=0 > >>>>> cache_count[89]=0 > >>>>> cache_count[90]=0 > >>>>> cache_count[91]=0 > >>>>> cache_count[92]=0 > >>>>> cache_count[93]=0 > >>>>> cache_count[94]=0 > >>>>> cache_count[95]=0 > >>>>> cache_count[96]=0 > >>>>> cache_count[97]=0 > >>>>> cache_count[98]=0 > >>>>> cache_count[99]=0 > >>>>> cache_count[100]=0 > >>>>> cache_count[101]=0 > >>>>> cache_count[102]=0 > >>>>> cache_count[103]=0 > >>>>> cache_count[104]=0 > >>>>> cache_count[105]=0 > >>>>> cache_count[106]=0 > >>>>> cache_count[107]=0 > >>>>> cache_count[108]=0 > >>>>> cache_count[109]=0 > >>>>> cache_count[110]=0 > >>>>> cache_count[111]=0 > >>>>> cache_count[112]=0 > >>>>> cache_count[113]=0 > >>>>> cache_count[114]=0 > >>>>> cache_count[115]=0 > >>>>> cache_count[116]=0 > >>>>> cache_count[117]=0 > >>>>> cache_count[118]=0 > >>>>> cache_count[119]=0 > >>>>> cache_count[120]=0 > >>>>> cache_count[121]=0 > >>>>> cache_count[122]=0 > >>>>> cache_count[123]=0 > >>>>> cache_count[124]=0 > >>>>> cache_count[125]=0 > >>>>> cache_count[126]=0 > >>>>> cache_count[127]=0 > >>>>> total_cache_count=0 > >>>>> common_pool_count=8192 > >>>>> no statistics available > >>>>> ../linux-generic/odp_packet_io.c:226:setup_pktio_entry():Unable to > >>>> init any > >>>>> I/O type. > >>>>> odp_l2fwd.c:642:create_pktio():Error: failed to open 0 > >>>>> > >>>>> > >>>>> Thanks & Regards, > >>>>> P Gyanesh Kumar Patra > >>>>> > >>>> > >>>> > >>> > >>> > > > >
