I was trying without the dpdk and it was not working properly. I guess i have to compile ODP with DPDK support to work with mellanox. Thank you for the details.
P Gyanesh Kumar Patra On Thu, Nov 9, 2017 at 12:47 PM, Elo, Matias (Nokia - FI/Espoo) < matias....@nokia.com> wrote: > Hi Gyanesh, > > Pretty much the same steps should also work with odp linux-generic. The > main difference is configure script. With linux-generic you use > '--with-dpdk-path=<dpdk_path>' option and optionally > --enable-dpdk-zero-copy flag. The supported dpdk version is v17.08. > > -Matias > > > On 9 Nov 2017, at 10:34, gyanesh patra <pgyanesh.pa...@gmail.com> wrote: > > > > Hi Maxim, > > Thanks for the help. I managed to figure out the configuration error and > it > > works fine for "ODP-DPDK". The MLX5 pmd was not included properly. > > > > But regarding "ODP" repo (not odp-dpdk), do i need to follow any steps to > > be able to use MLX ??? > > > > > > P Gyanesh Kumar Patra > > > > On Wed, Nov 8, 2017 at 7:56 PM, Maxim Uvarov <maxim.uva...@linaro.org> > > wrote: > > > >> On 11/08/17 19:32, gyanesh patra wrote: > >>> I am not sure what you mean. Can you please elaborate? > >>> > >>> As i mentioned before I am able to run dpdk examples. Hence the drivers > >>> are available and working fine. > >>> I configured ODP & ODP-DPDK with "LDFLAGS=-libverbs" and compiled to > >>> work with mellanox. I followed the same while compiling dpdk too. > >>> > >>> Is there anything i am missing? > >>> > >>> P Gyanesh Kumar Patra > >> > >> > >> in general if CONFIG_RTE_LIBRTE_MLX5_PMD=y was specified then it has to > >> work. I think we did test only with ixgbe. But in general it's common > code. > >> > >> "Unable to init any I/O type." means it it called all open for all pktio > >> in list here: > >> ./platform/linux-generic/pktio/io_ops.c > >> > >> and setup_pkt_dpdk() failed for some reason. > >> > >> I do not like allocations errors in your log. > >> > >> Try to compile ODP with --enable-debug-print --enable-debug it will make > >> ODP_DBG() macro work and it will be visible why it does not opens pktio. > >> > >> Maxim > >> > >> > >>> > >>> On Wed, Nov 8, 2017 at 5:22 PM, Maxim Uvarov <maxim.uva...@linaro.org > >>> <mailto:maxim.uva...@linaro.org>> wrote: > >>> > >>> is Mellanox pmd compiled in? > >>> > >>> Maxim. > >>> > >>> On 11/08/17 17:58, gyanesh patra wrote: > >>>> Hi, > >>>> I am trying to run ODP & ODP-DPDK examples on our server with > >>> mellanox 100G > >>>> NICs. I am using the odp_l2fwd example. While running the example, > >>> I am > >>>> facing some issues. > >>>> -> When I run "ODP" example using the if names given by kernel as > >>>> arguments, I am not getting enough throughput.(the value is very > >> low) > >>>> -> And when I try "ODP-DPDK" example using port ID as "0,1", it > >> can't > >>>> create pktio. Whereas I am able to run the examples from "DPDK" > >>>> repo with portID "0,1" for the same mellanox NICs. I tried running > >>> with > >>>> "81:00.0,81:00.1" and also with if-names too without any success. > >>> Adding > >>>> the whitelist using ODP_PLATFORM_PARAMS doesn't help either. > >>>> > >>>> Am I missing any steps to use mellanox NICs? OR is there a > >>> different method > >>>> to specify the device details to create pktio? > >>>> I am providing the output of "odp_l2fwd" examples for ODP and > >> ODP-DPDK > >>>> repository here. > >>>> > >>>> The NICs being used: > >>>> > >>>> 0000:81:00.0 'MT27700 Family [ConnectX-4]' if=enp129s0f0 > >> drv=mlx5_core > >>>> unused= > >>>> 0000:81:00.1 'MT27700 Family [ConnectX-4]' if=enp129s0f1 > >> drv=mlx5_core > >>>> unused= > >>>> > >>>> ODP l2fwd example run details: > >>>> ------------------------------ > >>>> root@ubuntu:/home/ubuntu/odp/test/performance# ./odp_l2fwd -i > >>>> enp129s0f0,enp129s0f1 > >>>> HW time counter freq: 2399999886 <tel:2399999886> > >>> <(239)%20999-9886> hz > >>>> > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishm.c:880:_odp_ishm_reserve():No huge pages, fall back to normal > >>> pages. > >>>> check: /proc/sys/vm/nr_hugepages. > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> PKTIO: initialized loop interface. > >>>> PKTIO: initialized pcap interface. > >>>> PKTIO: initialized ipc interface. > >>>> PKTIO: initialized socket mmap, use export > >>> ODP_PKTIO_DISABLE_SOCKET_MMAP=1 > >>>> to disable. > >>>> PKTIO: initialized socket mmsg,use export > >>> ODP_PKTIO_DISABLE_SOCKET_MMSG=1 > >>>> to disable. > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> > >>>> ODP system info > >>>> --------------- > >>>> ODP API version: 1.15.0 > >>>> ODP impl name: "odp-linux" > >>>> CPU model: Intel(R) Xeon(R) CPU E5-2680 v4 > >>>> CPU freq (hz): 3300000000 > >>>> Cache line size: 64 > >>>> CPU count: 56 > >>>> > >>>> > >>>> CPU features supported: > >>>> SSE3 PCLMULQDQ DTES64 MONITOR DS_CPL VMX SMX EIST TM2 SSSE3 FMA > >>> CMPXCHG16B > >>>> XTPR PDCM PCID DCA SSE4_1 SSE4_2 X2APIC MOVBE POPCNT TSC_DEADLINE > >>> AES XSAVE > >>>> OSXSAVE AVX F16C RDRAND FPU VME DE PSE TSC MSR PAE MCE CX8 APIC > >>> SEP MTRR > >>>> PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM > >> PBE > >>>> DIGTEMP TRBOBST ARAT PLN ECMD PTM MPERF_APERF_MSR ENERGY_EFF > >>> FSGSBASE HLE > >>>> AVX2 BMI2 ERMS INVPCID RTM LAHF_SAHF SYSCALL XD 1GB_PG RDTSCP > >>> EM64T INVTSC > >>>> > >>>> CPU features NOT supported: > >>>> CNXT_ID PSN ACNT2 BMI1 SMEP AVX512F LZCNT > >>>> > >>>> Running ODP appl: "odp_l2fwd" > >>>> ----------------- > >>>> IF-count: 2 > >>>> Using IFs: enp129s0f0 enp129s0f1 > >>>> Mode: PKTIN_DIRECT, PKTOUT_DIRECT > >>>> > >>>> num worker threads: 32 > >>>> first CPU: 24 > >>>> cpu mask: 0xFFFFFFFF000000 > >>>> > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> _ishmphy.c:152:_odp_ishmphy_map():mmap failed:Cannot allocate > >> memory > >>>> > >>>> Pool info > >>>> --------- > >>>> pool 0 > >>>> name packet pool > >>>> pool type packet > >>>> pool shm 11 > >>>> user area shm 0 > >>>> num 8192 > >>>> align 64 > >>>> headroom 128 > >>>> seg len 8064 > >>>> max data len 65536 > >>>> tailroom 0 > >>>> block size 8768 > >>>> uarea size 0 > >>>> shm size 72143104 > >>>> base addr 0x7f5fc1234000 > >>>> uarea shm size 0 > >>>> uarea base addr (nil) > >>>> > >>>> pktio/socket_mmap.c:401:mmap_setup_ring():setsockopt(pkt mmap): > >>> Invalid > >>>> argument > >>>> pktio/socket_mmap.c:496:sock_mmap_close():mmap_unmap_sock() > >>> Invalid argument > >>>> created pktio 1, dev: enp129s0f0, drv: socket > >>>> Sharing 1 input queues between 16 workers > >>>> Sharing 1 output queues between 16 workers > >>>> created 1 input and 1 output queues on (enp129s0f0) > >>>> pktio/socket_mmap.c:401:mmap_setup_ring():setsockopt(pkt mmap): > >>> Invalid > >>>> argument > >>>> pktio/socket_mmap.c:496:sock_mmap_close():mmap_unmap_sock() > >>> Invalid argument > >>>> created pktio 2, dev: enp129s0f1, drv: socket > >>>> Sharing 1 input queues between 16 workers > >>>> Sharing 1 output queues between 16 workers > >>>> created 1 input and 1 output queues on (enp129s0f1) > >>>> > >>>> Queue binding (indexes) > >>>> ----------------------- > >>>> worker 0 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 1 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 2 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 3 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 4 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 5 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 6 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 7 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 8 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 9 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 10 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 11 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 12 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 13 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 14 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 15 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 16 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 17 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 18 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 19 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 20 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 21 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 22 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 23 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 24 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 25 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 26 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 27 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 28 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 29 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> worker 30 > >>>> rx: pktio 0, queue 0 > >>>> tx: pktio 1, queue 0 > >>>> worker 31 > >>>> rx: pktio 1, queue 0 > >>>> tx: pktio 0, queue 0 > >>>> > >>>> > >>>> Port config > >>>> -------------------- > >>>> Port 0 (enp129s0f0) > >>>> rx workers 16 > >>>> tx workers 16 > >>>> rx queues 1 > >>>> tx queues 1 > >>>> Port 1 (enp129s0f1) > >>>> rx workers 16 > >>>> tx workers 16 > >>>> rx queues 1 > >>>> tx queues 1 > >>>> > >>>> [01] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [02] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [03] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [04] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [05] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [06] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [07] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [08] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [09] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [10] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [11] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [12] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [13] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [14] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [15] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [16] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [17] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [18] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [19] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [20] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [21] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [22] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [23] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [24] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [25] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [26] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [27] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [28] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [29] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [30] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [31] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> [32] num pktios 1, PKTIN_DIRECT, PKTOUT_DIRECT > >>>> > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 0 max pps, 0 rx drops, 0 tx drops > >>>> 96 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 64 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 32 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 0 pps, 96 max pps, 0 rx drops, 0 tx drops > >>>> 416 pps, 416 max pps, 0 rx drops, 0 tx drops > >>>> > >>>> > >>>> ODP-DPDK example run details: > >>>> ----------------------------- > >>>> root@ubuntu:/home/ubuntu/odp-dpdk/test/common_plat/performance# > >>> ./odp_l2fwd > >>>> -i 0,1 > >>>> EAL: Detected 56 lcore(s) > >>>> EAL: Probing VFIO support... > >>>> EAL: PCI device 0000:05:00.0 on NUMA socket 0 > >>>> EAL: probe driver: 8086:1528 net_ixgbe > >>>> EAL: PCI device 0000:05:00.1 on NUMA socket 0 > >>>> EAL: probe driver: 8086:1528 net_ixgbe > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> ../linux-generic/_ishm.c:866:_odp_ishm_reserve():No huge pages, > >>> fall back > >>>> to normal pages. check: /proc/sys/vm/nr_hugepages. > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> PKTIO: initialized loop interface. > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> No crypto devices available > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> ../linux-generic/_ishmphy.c:150:_odp_ishmphy_map():mmap > >> failed:Cannot > >>>> allocate memory > >>>> > >>>> ODP system info > >>>> --------------- > >>>> ODP API version: 1.15.0 > >>>> ODP impl name: odp-dpdk > >>>> CPU model: Intel(R) Xeon(R) CPU E5-2680 v4 > >>>> CPU freq (hz): 2400000000 > >>>> Cache line size: 64 > >>>> CPU count: 56 > >>>> > >>>> Running ODP appl: "odp_l2fwd" > >>>> ----------------- > >>>> IF-count: 2 > >>>> Using IFs: 0 1 > >>>> Mode: PKTIN_DIRECT, PKTOUT_DIRECT > >>>> > >>>> num worker threads: 32 > >>>> first CPU: 24 > >>>> cpu mask: 0xFFFFFFFF000000 > >>>> > >>>> mempool <packet pool>@0x7f1c7fe7de40 > >>>> flags=10 > >>>> pool=0x7f1c7e8ddcc0 > >>>> phys_addr=0x17ffe7de40 > >>>> nb_mem_chunks=1 > >>>> size=8192 > >>>> populated_size=8192 > >>>> header_size=64 > >>>> elt_size=2624 > >>>> trailer_size=64 > >>>> total_obj_size=2752 > >>>> private_data_size=64 > >>>> avg bytes/object=2752.000000 > >>>> internal cache infos: > >>>> cache_size=512 > >>>> cache_count[0]=0 > >>>> cache_count[1]=0 > >>>> cache_count[2]=0 > >>>> cache_count[3]=0 > >>>> cache_count[4]=0 > >>>> cache_count[5]=0 > >>>> cache_count[6]=0 > >>>> cache_count[7]=0 > >>>> cache_count[8]=0 > >>>> cache_count[9]=0 > >>>> cache_count[10]=0 > >>>> cache_count[11]=0 > >>>> cache_count[12]=0 > >>>> cache_count[13]=0 > >>>> cache_count[14]=0 > >>>> cache_count[15]=0 > >>>> cache_count[16]=0 > >>>> cache_count[17]=0 > >>>> cache_count[18]=0 > >>>> cache_count[19]=0 > >>>> cache_count[20]=0 > >>>> cache_count[21]=0 > >>>> cache_count[22]=0 > >>>> cache_count[23]=0 > >>>> cache_count[24]=0 > >>>> cache_count[25]=0 > >>>> cache_count[26]=0 > >>>> cache_count[27]=0 > >>>> cache_count[28]=0 > >>>> cache_count[29]=0 > >>>> cache_count[30]=0 > >>>> cache_count[31]=0 > >>>> cache_count[32]=0 > >>>> cache_count[33]=0 > >>>> cache_count[34]=0 > >>>> cache_count[35]=0 > >>>> cache_count[36]=0 > >>>> cache_count[37]=0 > >>>> cache_count[38]=0 > >>>> cache_count[39]=0 > >>>> cache_count[40]=0 > >>>> cache_count[41]=0 > >>>> cache_count[42]=0 > >>>> cache_count[43]=0 > >>>> cache_count[44]=0 > >>>> cache_count[45]=0 > >>>> cache_count[46]=0 > >>>> cache_count[47]=0 > >>>> cache_count[48]=0 > >>>> cache_count[49]=0 > >>>> cache_count[50]=0 > >>>> cache_count[51]=0 > >>>> cache_count[52]=0 > >>>> cache_count[53]=0 > >>>> cache_count[54]=0 > >>>> cache_count[55]=0 > >>>> cache_count[56]=0 > >>>> cache_count[57]=0 > >>>> cache_count[58]=0 > >>>> cache_count[59]=0 > >>>> cache_count[60]=0 > >>>> cache_count[61]=0 > >>>> cache_count[62]=0 > >>>> cache_count[63]=0 > >>>> cache_count[64]=0 > >>>> cache_count[65]=0 > >>>> cache_count[66]=0 > >>>> cache_count[67]=0 > >>>> cache_count[68]=0 > >>>> cache_count[69]=0 > >>>> cache_count[70]=0 > >>>> cache_count[71]=0 > >>>> cache_count[72]=0 > >>>> cache_count[73]=0 > >>>> cache_count[74]=0 > >>>> cache_count[75]=0 > >>>> cache_count[76]=0 > >>>> cache_count[77]=0 > >>>> cache_count[78]=0 > >>>> cache_count[79]=0 > >>>> cache_count[80]=0 > >>>> cache_count[81]=0 > >>>> cache_count[82]=0 > >>>> cache_count[83]=0 > >>>> cache_count[84]=0 > >>>> cache_count[85]=0 > >>>> cache_count[86]=0 > >>>> cache_count[87]=0 > >>>> cache_count[88]=0 > >>>> cache_count[89]=0 > >>>> cache_count[90]=0 > >>>> cache_count[91]=0 > >>>> cache_count[92]=0 > >>>> cache_count[93]=0 > >>>> cache_count[94]=0 > >>>> cache_count[95]=0 > >>>> cache_count[96]=0 > >>>> cache_count[97]=0 > >>>> cache_count[98]=0 > >>>> cache_count[99]=0 > >>>> cache_count[100]=0 > >>>> cache_count[101]=0 > >>>> cache_count[102]=0 > >>>> cache_count[103]=0 > >>>> cache_count[104]=0 > >>>> cache_count[105]=0 > >>>> cache_count[106]=0 > >>>> cache_count[107]=0 > >>>> cache_count[108]=0 > >>>> cache_count[109]=0 > >>>> cache_count[110]=0 > >>>> cache_count[111]=0 > >>>> cache_count[112]=0 > >>>> cache_count[113]=0 > >>>> cache_count[114]=0 > >>>> cache_count[115]=0 > >>>> cache_count[116]=0 > >>>> cache_count[117]=0 > >>>> cache_count[118]=0 > >>>> cache_count[119]=0 > >>>> cache_count[120]=0 > >>>> cache_count[121]=0 > >>>> cache_count[122]=0 > >>>> cache_count[123]=0 > >>>> cache_count[124]=0 > >>>> cache_count[125]=0 > >>>> cache_count[126]=0 > >>>> cache_count[127]=0 > >>>> total_cache_count=0 > >>>> common_pool_count=8192 > >>>> no statistics available > >>>> ../linux-generic/odp_packet_io.c:226:setup_pktio_entry():Unable to > >>> init any > >>>> I/O type. > >>>> odp_l2fwd.c:642:create_pktio():Error: failed to open 0 > >>>> > >>>> > >>>> Thanks & Regards, > >>>> P Gyanesh Kumar Patra > >>>> > >>> > >>> > >> > >> > >
