hi,

I'm using LPRng 3.6.26 with two loadbalancing queues that are totally
identical configured. One of them is working very well. The other one is
working OK for a while and then shows constantly the following error:

Status: CHOOSER selected 'pubps3b' at 10:59:15
 Status: pubps3: Do_queue_jobs: CHOOSER selection 'pubps3b' not a
subserver at 10:59:15
 Status: Filter_file: pgm '/usr/spool/lpd/bin/check_idle' exited with
status 'JSUCC' at 10:59:35

Does anyone have an idea what might be the problem, I don't see any fd
to be closed or something like that, the printer is ready, everything
should be fine ...

Thanks for any ideas


regards Christoph


-- 
/*   Christoph Beyer     |   Office: Building 2b / 23     *\ 
 *   DESY                |    Phone: 040-8998-2317        *
 *   - IT -              |      Fax: 040-8998-4060        *
\*   22603 Hamburg       |     http://www.desy.de         */

-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address

If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to