Rodriguez,
your first problem is that you installed LPRng with gdbm-support. This
doesn't work at all.
Try reconfiguring and recompiling LPRng-3.7.4 with "configure
--disable-gdbm ...".
Your second problem will disappear if you move the input filter out of
the spool directory.
consig1:\
:sd=/var/spool/lpd/consig1:\
:mx#0:\
:sh:\
:rm=10.1.8.162 :\
:rp=PASS:\
:mail_operator_on_error=true:\
:network_connect_grace=10:\
:longnumber=yes:\
:max_servers_active=10:\
:send_try=0:\
:lpd_bounce=true:\
-->> :if=/var/spool/lpd/consig1/filter:
# replace with something like
:if=/usr/libexec/filter
or even better
consig1:
:sd=/var/spool/lpd/%P
:mx#0
:sh
:rm=10.1.8.162
:rp=PASS
:mail_operator_on_error
:network_connect_grace=10
:longnumber
:max_servers_active=10
:send_try=0
:filter=/usr/libexec/filter
(:filter implies lpd_bounce)
Hope this helps.
Thomas Vogt
System- and Database Administration
Firmengruppe Dr. Güldener
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
