Thanks Eirik, I had a look in ifhp.conf, but the section relating to brother printers didn't have any pjl options... :
# PRINTER gs_ljet4 - Brother HL-660 # PRINTER gs_ljet4 - Brother HL-760 600dpi # PRINTER gs_ljet4 - Epson EPL5700 300dpi OK # PRINTER gs_ljet4 - HP DeskJet 600 margins wrong # PRINTER gs_ljet4 - HP DeskJet 870Cse # PRINTER gs_ljet4 - HP LaserJet 5 300dpi or 600dpi # PRINTER gs_ljet4 - HP LaserJet 5L 300dpi or 600dpi # PRINTER gs_ljet4 - HP LaserJet 6L 600dpi # PRINTER gs_ljet4 - HP LaserJet 1100 600dpi OK. # PRINTER gs_ljet4 - IBM Network Printer 17 # PRINTER gs_ljet4 - IBM/Lexmark 4029 Margins wrong. # PRINTER gs_ljet4 - Lexmark Optra E+ # PRINTER gs_ljet4 - Lexmark Optra SC 1275 B/W only. # PRINTER gs_ljet4 - Oki OL410ex LED printer 300dpi or 600dpi [ gs_ljet4 ] tc=pcl_gs gs_device=ljet4 gs_options= If you have the patch for ghostscript, would you be able to mail it to me? Searching brother's site yielded no results, and their tech support, although prompt, couldn't (or wouldn't) help. Thanks, Chris -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Eirik Thorsnes Sent: Monday, 10 December 2001 19:40 To: [EMAIL PROTECTED] Subject: Re: LPRng: FW: brother hl1250 - pjl not supported ... We had a brother hl1270 which we gave up on. If you go to the support pages for Brother, you will find a patch to ghostscript which is needed. (I couldn't make it apply cleanly, but maybe I did something strange). The 'pjl not supported' comes from the fact that the windows drivers wraps the postscript or pcl in pjl. (if you do a write to file - you will see it at top and bottom). You could try and enable pjl in ifhp for the printer (remove the @ from pjl in the section), and I think you should remove any status or pagecount. I don't think the printer likes that. Eirik Thorsnes ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
