"Patrick Powell" said: > > > Did I miss a config option? > > Welll... sort of. > > See: > > # Purpose: reverse LPQ status format when specified remotehost > # default reverse_lpq_status=0 (STRING) > > For example: > lp:.... > :reverse_lpq_status=sun.4.system > > This should work. I think. >
Thanks for the reply, however... ...no dice. Even tried :reverse_lpq_status=*, still didn't give it up. Though lpq -l on the SysV side gets a nice debug output from lpq. =) You have it as reverse_lpq_format in the HOWTO, tried that to no avail, too. Anything else I can try? Thanks, --nate > > > > > Thanks in advance, > > --nate > > \ > > Patrick Powell Astart Technologies > [EMAIL PROTECTED] 6741 Convoy Court > Network and System San Diego, CA 92111 > Consulting 858-874-6543 FAX 858-751-2435 > LPRng - Print Spooler (http://www.lprng.com) ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
