> From [EMAIL PROTECTED] Thu May 6 09:42:57 2004 > Subject: LPRng: LPRng 3.8.27 w/ ifhp-3.5.17 - missing port on appsocket/SNMP printer > To: [EMAIL PROTECTED] > From: [EMAIL PROTECTED] > Date: Thu, 6 May 2004 11:53:29 -0400 > > > > I'm trying to get a Xerox Phaser 7300DX to print using the latest LPRng > software. I've tried all the Phaser entries, but they all fail with a > 'missing port number' after successfully getting status with SNMP. Here is > the status file with ifhp debug=1 > > (of) main: using model 'phaser7700' at 15:32:30.570 > (of) main: appsocket device now 'wfd-color3%9100' at 15:32:30.571 > (of) Open_device: device 'wfd-color3%9100' at 15:32:30.571 > (of) Open_device: closed fd 1 at 15:32:30.571 > (of) Link_open: destination '143.122.1.10' port 9100, attempt 1 at 15:32:30.575 > (of) Fd_readable: nonblocking read returned -1, errno 35 (Operation would block) at 15:32:30.576 > (of) Open_device: success at 15:32:30.576 > (of) main: start snmp_dev <NULL>, Device wfd-color3%9100, :lp=wfd-color3%9100 at 15:32:30.576 > (of) snmp device 'wfd-color3' at 15:32:30.576 > (of) main: snmp_monitor device now 'wfd-color3' at 15:32:30.576 > (of) using snmp_program '/usr/local/libexec/filters/snmp_printer_status -h "wfd-color3" -m "default" -f > "/usr/local/libexec/filters/snmp_printer_status.conf"' at 15:32:30.576 > (of) main: poll for status 0, Dev_sleep 1000 msec at 15:32:30.577 > (of) Check_pagecount: pagecount using 'snmp info pagecount' at 15:32:30.582 > (of) Process_job: setting up printer at 15:32:30.583 > (of) Make_tempfile: tempfile 'ifhpXXXXXX' at 15:32:30.583 > (of) Make_tempfile: new tempfile 'ifhpcaclG3', fd 6 at 15:32:30.586 > (of) Process_job: starting OF mode passthrough at 15:32:30.587 > (of) Start_of_job: do_pagecount 1, ps 0, pjl 0, prog '<NULL>' at 15:32:30.587 > (of) Do_sync: getting sync using 'snmp' and snmp at 15:32:30.587 > (of) Check_device_status: warning = 'level: other, group: generalprinter(1), message: power saver' at 15:32:31.665 > (of) Check_device_status: devicestatus = 'unknown' at 15:32:31.965 > (of) Check_device_status: devicedescr = 'xerox phaser 7300 dx v(2.12/15.78.10.14.2002/0.1.33/4.68) printer 512mb lpl205689' at 15:32:32.331 > (of) Check_device_status: printerstatus = 'other' at 15:32:32.461 > (of) Check_device_status: prtmarkerlifecount = '41' at 15:32:32.662 > (of) Check_device_status: status = 'power saver mode active - press ok button' at 15:32:32.796 > (of) Do_sync: sync done at 15:32:32.796 > (of) Do_pagecount: pagecount at start -1 at 15:32:32.796 > (of) Do_pagecount: getting pagecount, timeout 0, pagecount_same 0, pagecount_poll 0 at 15:32:32.796 > (of) Current_pagecounter: starting, use_pjl 0, use_ps 0, timeout 0 at 15:32:32.796 > (of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.366 > (of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.603 > (of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.666 > (of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.733 > (of) Check_device_status: pagecount = '41' at 15:32:34.796 > (of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.796 > (of) Current_pagecounter: page 1, pagecounter 41 at 15:32:34.796 > (of) Do_pagecount: pagecounter 41 after 1 attempts at 15:32:34.796 > (of) Start_of_job: Appsocket device close at 15:32:34.796 > (of) Open_device: device 'wfd-color3' at 15:32:34.796 > (of) Open_device: closed fd 1 at 15:32:34.796 > (of) Link_open: missing port number 'wfd-color3' at 15:32:34.796 > > > Here is the printcap entry: > > ...SNIP... > > color3|co3|Xerox Phaser 7300DX|Copy Center > :lp=wfd-color3%9100 > :ifhp=model=phaser7700,appsocket > :filter=/usr/local/libexec/filters/ifhp -Tdebug=1 > :vf=/usr/local/libexec/filters/ifhp -c > :of=/usr/local/libexec/filters/ofhp -Tdebug=1 > :fx=flpv > :pl=60 > :pw=83 > :sh > :rw > :tc=.common,.ifacct > > ...SNIP... > > .common|Common definitions for all printers > :af=/var/adm/%P-acct > :lf=/var/adm/%P-log > :sd=/var/spool/lpd/%P > :pr=/usr/local/libexec/filters/pr-arg-fix $l $w $T > :mx=0 > :mc#500 > > .ifacct|Common accounting setup for all printers using IFHP as print filter > :as=|/usr/local/libexec/filters/accounting.pl start > :ae=|/usr/local/libexec/filters/accounting.pl end > > Any ideas what's going on and how to fix it? > > Thank - Justus
I will try to reproduce this... Patrick ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRng MAILING LIST The address you post from or your Reply-To address MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. To subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, call Patrick Powell or one of the friendly staff at Astart Technologies for help. Astart also does support for LPRng. Also, check the Web Page at: http://www.lprng.com for any announcements. Astart Technologies (LPRng - Print Spooler http://www.lprng.com) 6741 Convoy Court San Diego, CA 92111 858-874-6543 FAX 858-751-2435 -----------------------------------------------------------------------------
