I'm trying to get a Xerox Phaser 7300DX to print using the latest LPRng
software. I've tried all the Phaser entries, but they all fail with a
'missing port number' after successfully getting status with SNMP. Here is
the status file with ifhp debug=1
(of) main: using model 'phaser7700' at 15:32:30.570
(of) main: appsocket device now 'wfd-color3%9100' at 15:32:30.571
(of) Open_device: device 'wfd-color3%9100' at 15:32:30.571
(of) Open_device: closed fd 1 at 15:32:30.571
(of) Link_open: destination '143.122.1.10' port 9100, attempt 1 at 15:32:30.575
(of) Fd_readable: nonblocking read returned -1, errno 35 (Operation would block) at
15:32:30.576
(of) Open_device: success at 15:32:30.576
(of) main: start snmp_dev <NULL>, Device wfd-color3%9100, :lp=wfd-color3%9100 at
15:32:30.576
(of) snmp device 'wfd-color3' at 15:32:30.576
(of) main: snmp_monitor device now 'wfd-color3' at 15:32:30.576
(of) using snmp_program '/usr/local/libexec/filters/snmp_printer_status -h
"wfd-color3" -m "default" -f
"/usr/local/libexec/filters/snmp_printer_status.conf"' at 15:32:30.576
(of) main: poll for status 0, Dev_sleep 1000 msec at 15:32:30.577
(of) Check_pagecount: pagecount using 'snmp info pagecount' at 15:32:30.582
(of) Process_job: setting up printer at 15:32:30.583
(of) Make_tempfile: tempfile 'ifhpXXXXXX' at 15:32:30.583
(of) Make_tempfile: new tempfile 'ifhpcaclG3', fd 6 at 15:32:30.586
(of) Process_job: starting OF mode passthrough at 15:32:30.587
(of) Start_of_job: do_pagecount 1, ps 0, pjl 0, prog '<NULL>' at 15:32:30.587
(of) Do_sync: getting sync using 'snmp' and snmp at 15:32:30.587
(of) Check_device_status: warning = 'level: other, group: generalprinter(1), message:
power saver' at 15:32:31.665
(of) Check_device_status: devicestatus = 'unknown' at 15:32:31.965
(of) Check_device_status: devicedescr = 'xerox phaser 7300 dx
v(2.12/15.78.10.14.2002/0.1.33/4.68) printer 512mb lpl205689' at 15:32:32.331
(of) Check_device_status: printerstatus = 'other' at 15:32:32.461
(of) Check_device_status: prtmarkerlifecount = '41' at 15:32:32.662
(of) Check_device_status: status = 'power saver mode active - press ok button' at
15:32:32.796
(of) Do_sync: sync done at 15:32:32.796
(of) Do_pagecount: pagecount at start -1 at 15:32:32.796
(of) Do_pagecount: getting pagecount, timeout 0, pagecount_same 0, pagecount_poll 0 at
15:32:32.796
(of) Current_pagecounter: starting, use_pjl 0, use_ps 0, timeout 0 at 15:32:32.796
(of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.366
(of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.603
(of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.666
(of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.733
(of) Check_device_status: pagecount = '41' at 15:32:34.796
(of) Current_pagecounter: Read_status_timeout result 0 at 15:32:34.796
(of) Current_pagecounter: page 1, pagecounter 41 at 15:32:34.796
(of) Do_pagecount: pagecounter 41 after 1 attempts at 15:32:34.796
(of) Start_of_job: Appsocket device close at 15:32:34.796
(of) Open_device: device 'wfd-color3' at 15:32:34.796
(of) Open_device: closed fd 1 at 15:32:34.796
(of) Link_open: missing port number 'wfd-color3' at 15:32:34.796
Here is the printcap entry:
...SNIP...
color3|co3|Xerox Phaser 7300DX|Copy Center
:lp=wfd-color3%9100
:ifhp=model=phaser7700,appsocket
:filter=/usr/local/libexec/filters/ifhp -Tdebug=1
:vf=/usr/local/libexec/filters/ifhp -c
:of=/usr/local/libexec/filters/ofhp -Tdebug=1
:fx=flpv
:pl=60
:pw=83
:sh
:rw
:tc=.common,.ifacct
...SNIP...
.common|Common definitions for all printers
:af=/var/adm/%P-acct
:lf=/var/adm/%P-log
:sd=/var/spool/lpd/%P
:pr=/usr/local/libexec/filters/pr-arg-fix $l $w $T
:mx=0
:mc#500
.ifacct|Common accounting setup for all printers using IFHP as print filter
:as=|/usr/local/libexec/filters/accounting.pl start
:ae=|/usr/local/libexec/filters/accounting.pl end
Any ideas what's going on and how to fix it?
Thank - Justus
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
