Hi, Ketan:
From: lsr-boun...@ietf.org <lsr-boun...@ietf.org> On Behalf Of Ketan Talaulikar Sent: Monday, January 31, 2022 1:13 AM To: Aijun Wang <wangai...@tsinghua.org.cn> Cc: lsr <lsr@ietf.org>; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org; Acee Lindem (acee) <a...@cisco.com>; Albert Fu <af...@bloomberg.net> Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi Aijun, There is a need for a BFD session to be established between neighboring routers which directly forward data between them to ensure reachability between them. That is my understanding of various implementations and deployments at operators. This is independent of the strict mode of operation. [WAJ] What is the action when the BFD session between the DRothers is not BROUGHT UP or DOWN then? Perhaps you have a different requirement for "optimization of BFD sessions on multi-access networks"? If so, it would be clearer if you could put that requirement/proposal together as a draft for the WG to review. Also, that would be in any way independent of this specification since what you are referring to is the base use of BFD by OSPF. Thanks, Ketan On Sun, Jan 30, 2022 at 7:58 AM Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > wrote: Hi, Acee and Ketan: No, I don’t want to change the NBMA/Broadcast in OSPF to P2MP mode. What I want to express is that you brought up the full mesh BFD sessions among the routers within such network type. Is it necessary to bring some of them(the BFD sessions between DRothers) to DOWN after the OSPF adjacency are established between the DRother and DR/BDR router? If the BFD session is bootstrapped after the OSPF adjacency is established, there will be no such extra/useless BFD sessions Aijun Wang China Telecom On Jan 30, 2022, at 02:45, Acee Lindem (acee) <a...@cisco.com <mailto:a...@cisco.com> > wrote: Speaking as WG member: Hi Aijun, If you want a per-neighbor state and route, you have to use P2MP. This scope of this draft isn’t to try and make NBMA/Broadcast model something that it is not. This is should be common knowledge and the draft needn’t address it. Those of us who remember ATM emulated LANs (which were not always symmetrically reliable) will recall using P2MP on an inherently multi-access network. Acee From: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > Date: Saturday, January 29, 2022 at 3:46 AM To: 'Ketan Talaulikar' <ketant.i...@gmail.com <mailto:ketant.i...@gmail.com> > Cc: "lsr@ietf.org <mailto:lsr@ietf.org> " <lsr@ietf.org <mailto:lsr@ietf.org> >, "draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> " <draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> >, 'Albert Fu' <af...@bloomberg.net <mailto:af...@bloomberg.net> >, Acee Lindem <a...@cisco.com <mailto:a...@cisco.com> > Subject: RE: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi, Ketan: OK, then back to my original question: If one of the BFD session(between DRothers) is DOWN, will it bring DOWN the OSPF adjacency(between the DRother and DR/BDR)? If not, then the traffic between these DRothers will be lost; If yes, it seems strange, because the BFD session between the DRother and DR/BDR may be still UP. I think here there are some mismatch between the BFD sessions and the OSPF adjacency in Broadcast/NBMA network, then some clarification for the procedures are needed. Best Regards Aijun Wang China Telecom From: lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> <lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> > On Behalf Of Ketan Talaulikar Sent: Saturday, January 29, 2022 4:22 PM To: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > Cc: lsr@ietf.org <mailto:lsr@ietf.org> ; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> ; Albert Fu <af...@bloomberg.net <mailto:af...@bloomberg.net> >; Acee Lindem (acee) <acee=40cisco....@dmarc.ietf.org <mailto:40cisco....@dmarc.ietf.org> > Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi Aijun, The choice of the term "adjacency" was not accurate in my previous response to you. I meant "neighborship". That said, the substance of my response still remains the same. Thanks, Ketan On Sat, Jan 29, 2022 at 1:42 PM Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > wrote: Hi, Ketan: For the Broadcast/NMBA network type, if you establish BFD sessions before the DR/BDR selection, then there will be full mesh BFD sessions within the routers on such media type? Instead of establishing the BFD sessions with DR/BDR only, the same as the OSPF adjacency relationship? If so, if one of the BFD session that not with the DR/BDR is DOWN, what’s the action then? KT> I think there is perhaps a misunderstanding of the purpose of BFD use with OSPF. Perhaps a careful reading of RFC5882 would help? In short, BFD is used to verify bidirectional connectivity between neighbors to ensure data may be forwarded between them. OSPF adjacency is built between every router in a LAN since they can directly forward packets between themselves. [WAJ] In Broadcast/NBMA network, OSPF adjacency is built only between the routers and DR/BDR. Thanks, Ketan Best Regards Aijun Wang China Telecom From: Ketan Talaulikar <ketant.i...@gmail.com <mailto:ketant.i...@gmail.com> > Sent: Saturday, January 29, 2022 11:13 AM To: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > Cc: Acee Lindem (acee) <acee=40cisco....@dmarc.ietf.org>; lsr@ietf.org <mailto:lsr@ietf.org> ; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> ; Albert Fu <af...@bloomberg.net <mailto:af...@bloomberg.net> > Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi Aijun, Please check inline below. On Sat, Jan 29, 2022 at 7:38 AM Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > wrote: Hi, Acee: Yes. Then I think the sentence in https://datatracker.ietf.org/doc/html/draft-ietf-lsr-ospf-bfd-strict-mode#section-2 as the following should be relaxed: “A router MUST include the LLS block with the LLS Type 1 Extended Options and Flags TLV with the B-bit set in its Hello and DD packets when strict-mode for BFD is enabled on the link.” It seems that there is no use for such information being included in the DD packets. KT> Since LLS is present in both Hello and DD packets, not including the B bit in DD packets will result in a different LLS options being seen in Hello and DD. This can trigger the change in LLS option logic unnecessarily. Hence, to keep things simple and consistent (and this should be for technically all LLS options), it makes sense to include them in both Hello and DD packets. And, one more question to the Authors of this draft: What’s the procedures for the interaction of BFD session and OSPF adjacency establishment in the Broadcast/NBMA network type interface, which is involved the DR/BDR election procedures? The BFD session establishment should be after the DR/BDR election? Should the procedures in section 4 be updated to cover such scenario? KT> The procedures in Sec 4 update the transition to INIT state in the OSPF Neighbor FSM. This happens before DR election and is independent of the type of network/link - applies also to Broadcast/NMBA. The main goal of this proposal is to first verify BFD session establishment and only then trigger OSPF adjacency procedures. Doing DR election before BFD session does not serve the purpose. Thanks, Ketan Best Regards Aijun Wang China Telecom From: lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> <lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> > On Behalf Of Acee Lindem (acee) Sent: Friday, January 28, 2022 8:30 PM To: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> >; 'Ketan Talaulikar' <ketant.i...@gmail.com <mailto:ketant.i...@gmail.com> > Cc: lsr@ietf.org <mailto:lsr@ietf.org> ; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> ; 'Albert Fu' <af...@bloomberg.net <mailto:af...@bloomberg.net> > Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi Aijun, From: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > Date: Friday, January 28, 2022 at 1:41 AM To: 'Ketan Talaulikar' <ketant.i...@gmail.com <mailto:ketant.i...@gmail.com> > Cc: "lsr@ietf.org <mailto:lsr@ietf.org> " <lsr@ietf.org <mailto:lsr@ietf.org> >, "draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> " <draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> >, Acee Lindem <a...@cisco.com <mailto:a...@cisco.com> >, 'Albert Fu' <af...@bloomberg.net <mailto:af...@bloomberg.net> > Subject: RE: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi, Ketan: I know. According to the description of RFC 5613, the LLS Data Block is only attached at the OSPF hello and DD packets. If you read section 4 of the draft, you’ll see that the strict mode behavior is based on the LLS block in OSPF Hello packets. Thanks, Acee From: lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> <lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> > On Behalf Of Aijun Wang Sent: Friday, January 28, 2022 2:02 PM To: 'Ketan Talaulikar' <ketant.i...@gmail.com <mailto:ketant.i...@gmail.com> > Cc: lsr@ietf.org <mailto:lsr@ietf.org> ; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> ; 'Acee Lindem (acee)' <a...@cisco.com <mailto:a...@cisco.com> >; 'Albert Fu' <af...@bloomberg.net <mailto:af...@bloomberg.net> > Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi, Ketan: What I want to know is that where to encapsulate the LLS Data Block if the router uses OSPFv3 Extended LSAs to establish the adjacency? Best Regards Aijun Wang China Telecom From: lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> <lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> > On Behalf Of Ketan Talaulikar Sent: Friday, January 28, 2022 12:56 PM To: Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > Cc: lsr@ietf.org <mailto:lsr@ietf.org> ; draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> ; Acee Lindem (acee) <a...@cisco.com <mailto:a...@cisco.com> >; Albert Fu <af...@bloomberg.net <mailto:af...@bloomberg.net> > Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 Hi Aijun, This document proposes changes to the adjacency establishment procedures and the use of LLS for negotiations. As such, it is independent of OSPFv3 Extended LSAs. Please let us know if you believe otherwise. Thanks, Ketan On Fri, Jan 28, 2022 at 8:29 AM Aijun Wang <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn> > wrote: Hi, Albert: Want to how to accomplish this aim when router conforms to RFC8362? Best Regards Aijun Wang China Telecom From: lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> <lsr-boun...@ietf.org <mailto:lsr-boun...@ietf.org> > On Behalf Of Albert Fu (BLOOMBERG/ 120 PARK) Sent: Friday, January 28, 2022 4:25 AM To: a...@cisco.com <mailto:a...@cisco.com> ; lsr@ietf.org <mailto:lsr@ietf.org> Cc: draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> Subject: Re: [Lsr] Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 I support this draft, as one of the authors, as well as a BFD user, and hope it becomes a standard. This draft addresses an issue that we have encountered in our production network, hence we have been actively working with our vendors. Most people deploy BFD with OSPF (or any routing protocols) to enable fast failure detection. This is to ensure that routing/forwarding path is diverted as soon as a connectivity issue is detected. OSPF BFD strict mode ensures this, in that it requires that the BFD session to be established before OSPF adjacency will be allowed to be established, thus ensuring that routing/forwarding will not use the path without a working BFD adjacency. Without this standard, as per most current default OSPF BFD deployment, OSPF adjacency is established without BFD. OSPF adjacency then triggers the BFD session to be established. If a "break-in-middle" issue occurred (where last mile interface status remains up) before BFD session comes up, we would lose the fast failure detection capability. This situation will require lengthy OSPF protocol timeout to detect such failure, resulting in traffic being black-holed for extended period. We have a large network consisting of several thousand links throughout the world, and have seen this issue several times that had impacted production traffic negatively. As mentioned in a previous email, we have successfully tested this feature on the Juniper MX (JUNOS 19.4) and also Cisco ASR9k (XR 7.3.2) platforms. Thanks Albert Fu Bloomberg From: a...@cisco.com <mailto:a...@cisco.com> At: 01/27/22 12:08:36 UTC-5:00 To: lsr@ietf.org <mailto:lsr@ietf.org> Cc: draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org <mailto:draft-ietf-lsr-ospf-bfd-strict-m...@ietf.org> Subject: Working Group Last Call for "OSPF Strict-Mode for BFD" - draft-ietf-lsr-ospf-bfd-strict-mode-04 LSR WG, This begins a two week last call for the subject draft. Please indicate your support or objection on this list prior to 12:00 AM UTC on February 11th, 20222. Also, review comments are certainly welcome. Thanks, Acee _______________________________________________ Lsr mailing list Lsr@ietf.org <mailto:Lsr@ietf.org> https://www.ietf.org/mailman/listinfo/lsr
_______________________________________________ Lsr mailing list Lsr@ietf.org https://www.ietf.org/mailman/listinfo/lsr