The following errata report has been submitted for RFC2328,
"OSPF Version 2".

--------------------------------------
You may review the report below and at:
https://www.rfc-editor.org/errata/eid7757

--------------------------------------
Type: Technical
Reported by: Lokesh Venkata Kumar Chakka <lok...@truetraffik.in>

Section: A.4.5

Original Text
-------------
Forwarding address
Data traffic for the advertised destination will be forwarded to this address. 
If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded 
instead to the LSA's originator (i.e., the responsible AS boundary router).

Corrected Text
--------------
Forwarding address
Data traffic for the advertised destination will be forwarded to this address. 
If the Forwarding address is set to a Router ID address value other than 
0.0.0.0, data traffic will be forwarded to that Router instead to the LSA's 
originator (i.e., the responsible AS boundary router).

Notes
-----
Data traffic destined to the network indicated by Link State ID will be routed 
to that Router ID mentioned in forwarding address. If forwarding address is set 
to 0.0.0.0, it will be forwarded to LSA Originator itself.

Instructions:
-------------
This erratum is currently posted as "Reported". (If it is spam, it 
will be removed shortly by the RFC Production Center.) Please
use "Reply All" to discuss whether it should be verified or
rejected. When a decision is reached, the verifying party  
will log in to change the status and edit the report, if necessary.

--------------------------------------
RFC2328 (no draft string recorded)
--------------------------------------
Title               : OSPF Version 2
Publication Date    : April 1998
Author(s)           : J. Moy
Category            : INTERNET STANDARD
Source              : Open Shortest Path First IGP
Area                : Routing
Stream              : IETF
Verifying Party     : IESG

_______________________________________________
Lsr mailing list
Lsr@ietf.org
https://www.ietf.org/mailman/listinfo/lsr

Reply via email to