Jim McQuillan wrote: > Clayton, > > In almost all cases, your kernels should download in under 1 second. > > The card that is taking alot longer, and having neighbour table > overflows, is probably having > a resource conflict of some sort.
We get "neighbour table overflows" on all our ltsp workstations > > > Can you try putting the card in another slot? > > Is the IRQ or IO-Address of the card conflicting with any other > devices in the machine? > > Can you try using that card in a different machine? > > I'm guessing that one of the above things will clear up your problem, > or at least help > to explain what is wrong. > > Jim McQuillan > [EMAIL PROTECTED] > > > Clayton Rogers wrote: > >> I have two questions that have been bothering us for a while. >> >> Q1. We have two machines. One machine has a 100Mb card which loads >> the kernel off the tft server in no time, less then a second. The >> machine with the 10Mb network card takes anywhere between 30-120 >> seconds. Why is it so? Is this a case of Full Duplex mode problems? >> >> Q2. Why do we get 3 "neighbour table overflow" messages after it has >> found the network card in the kernel initialising messages? >> >> Initialising network card..... >> >> snip >> Looking up port of RPC 10000......... >> <neighbour table overflow> >> <neighbour table overflow> >> <neighbour table overflow> >> snip >> >> Cheers >> >> >> >> _____________________________________________________________________ >> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >> For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net