Juan Carlos,

It looks like you have the wrong Etherboot driver for
your network card.  What kind of card is it and
which Etherboot driver did you choose ?

Jim.


Juan Carlos Zarta Escobar wrote:

> When I wrote the ROM to the disk this work Ok, but when the workstation 
> start the mac address is c1:c1:c1:c1:c1 i think is bad.
> 
> Another thing you can help with the setps for install LTSP on suse 7.2 on 
> by one ..... sorry but i dont have experience do it.
> 
> 
>>>>>>>>>>>>>>>>>>>Original Message <<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>
> 
> On 10/01/02, 10:24:28, Jim McQuillan <[EMAIL PROTECTED]> wrote regarding Re: 
> [Ltsp-discuss] LTSP on Suse 7.1 or if possible on 7.2:
> 
> 
> 
>>Juan,
>>
> 
>>If the ltsp_initialize script didn't create the
>>proper dhcpd.conf file, you can edit it yourself.
>>
> 
>>Take a look at
>>
> 
>>    http://www.LTSP.org/instructions-3.0.html
>>
> 
>>Near the bottom of that document it shows an example
>>of what your dhcpd.conf file should look like.
>>
> 
>>That probably explains why the DHCP service won't start.
>>
> 
>>As for the mask in the workstations, what do you mean ?
>>Are you talking about the setting inside the dhcpd.conf
>>file ?  If so, just edit the file and set it to what you
>>want.
>>
> 
>>Hope that helps,
>>
> 
>>Jim McQuillan
>>[EMAIL PROTECTED]
>>
> 
> 
>>Juan Carlos Zarta Escobar wrote:
>>
> 
>>>Hello Everybody
>>>
>>>I'm trying to install LTSP 3.0 on my Suse 7.1 al rpm's run Ok but I have
>>>some problems
>>>
>>>1. ltsp_initialize did not work properly because de dhcp.conf.example was
>>>not created i think this shell has a bug
>>>
>>>2. DHCP service not start
>>>
>>>3. The mask in the workstations is bad,
>>>
>>>Another question: I preferr Suse 7.2 its possible ??
>>>
>>>There is a lot of problems you can help me ?? Thanks.
>>>
>>>--
>>>Juan Carlos Zarta Escobar
>>>[EMAIL PROTECTED]
>>>http://www.wskytel.com.co
>>>Cel 2575770
>>>
>>>
>>>_____________________________________________________________________
>>>Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>>>      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>>>For additional LTSP help,   try #ltsp channel on irc.openprojects.net
>>>
>>>



_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to