Why u dont use tcpdump for something like that ? Ust simple Tcpdump and enter ( if there is two interfaces use tcpdump i -eth0 ) To exclude some uneccecery things use tcpdump and not port 22 or something else
-----Ursprüngliche Nachricht----- Von: Jim McQuillan [mailto:[EMAIL PROTECTED]] Gesendet: Sonntag, 20. Jänner 2002 21:05 An: mslicker Cc: [EMAIL PROTECTED] Betreff: Re: [Ltsp-discuss] Loading Kernel--sleep..sleep..sleep.... Matthew, TFTP uses port 69. So, to test it, do this: netstat -an | grep ":69 " Also, take a look at the troubleshooting section of the ltsp-3.0 docs. Jim McQuillan [EMAIL PROTECTED] mslicker wrote: > I am currently at my office and the system is my home so I can't give > you the exact lines per-say at the moment. However, I can tell you > that it says it's loading the kernel and to the right of the line that > lists the path to the kernel is where the first sleep message comes > up. > > I'll try checking if tftp is up and running. Question, does tftp use > the same port as regular FTP? > > --Matthew > > On Sun, 20 Jan 2002, Jim McQuillan wrote: > > >>Matthew, >> >>Can you show me the lines just above the 'sleep' messages ? >> >>And, are you sure tftp is running on the server ? >> >>Jim McQuillan >>[EMAIL PROTECTED] >> >> >> >>mslicker wrote: >> >> >>>Does anyone have any idea what might be wrong or what to check? >>> >>>It says it's getting the kernel and it's named properly. But then it >>>repeatedly sleeps.. >>> >>>I'm using the LTSP 3.0 from the CD I purchased form the LTSP site. >>>DHCP appears to be working perfectly.. >>> >>>BTW: The LTSP 3.0 CD is excellent, except for a couple errors that >>>were easy to identify and fix. The documentation says has the wrong >>>version where in the rpm install instructions and the >>>dhcpd.conf.example needs the word "echo" removed and a semicolon >>>added to the end of line 18. >>> >>>The truth is, I was impressed.. Except that my terminal won't seem >>>to boot yet.. Which is kinda important. >>> >>>--Matthew >>> >>> >>>_____________________________________________________________________ >>>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>>For additional LTSP help, try #ltsp channel on irc.openprojects.net >>> >>> >> >> >>_____________________________________________________________________ >>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>For additional LTSP help, try #ltsp channel on irc.openprojects.net >> >> > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net