Fivda, What you are describing is completely normal.
When the workstation boots up, it creates a ramdisk and mounts it on the /tmp directory. Then, it creates those files that are missing, which causes the symlinks to be correct. As for the /dev directory, LTSP now uses devfs, which automatically creates the device nodes as needed. They exist while the workstation is running and can only be seen by the workstation. Hope that helps, Jim McQuillan [EMAIL PROTECTED] On 7 Feb 2002, Fivda Harry wrote: > Hi, I need help. > I'm using RH7.2 distro with upgraded kernel to 2.4.13, > and tried these installation files: > ltsp_core-3.0.0-1.i386.rpm , ltsp_core-3.0.0-i386.tgz > ltsp_kernel-3.0.1-1.i386.rpm, ltsp_kernel-3.0.1-i386.tgz > ltsp_x_core-3.0.1-1.i386.rpm, ltsp_x_core-3.0.1-i386.tgz > ltsp_x_fonts-3.0.0-0.i386.rpm, ltsp_x_fonts-3.0.0-i386.tgx > ltsp_x366_svga-3.0.0-0.i386.rpm, ltsp_x366_svga-3.0.0-i386.tgz > ltsp_x366_vga16-3.0.0-0i386.rpm, ltsp_x366_vga16-3.0.0-i386.rpm > > both installation , rpm and tgz seems like didn't work. > There are several broken links in directory /opt/ltsp/i386/etc/ , such as > XF86Config to (not there) /tmp/XF86Config, and host.alow, resolv.conf, > syslog.conf, initrunlvl, and ioctl.save . Most of these links pointing to > /tmp/theirname which are not there. > and I was expecting to see some files in /opt/ltsp/i386/dev/ like tty0 or > psaux or ttyS0. I do not see them in that directory. > > Can anybody help me? did i miss something in the installastion? > I've used both 'rpm -ivh' and './install.sh' > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net