Trying to make my ThinkNIC boot, I finally removed the "option vendor-encapsulated-options ..." line out of dhcpd.conf and now it gets DHCP and seems to try and boot.
I also copied the default file to a file named after the hex values of the client's IP, as specified in the HowTo. Now I am stuck at a point where the screen shows the following as the last lines (exclusing the equals signs, of course): ============================================================== IP-Config: Got DHCP answer from 10.0.249.3, my address is 10.0.249.182 IP-Config: Complete: device=eth0, addr=10.0.249.182, mask=255.255.255.0, gw=10.0.249.254, host=ws182, domain=simpflex1.com, nis-domain=(none), bootserver=10.0.249.3, rootserver=10.0.249.254, rootpath=10.0.249.3:/opt/ltsp/i386 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 10.0.249.254 portmap: server 10.0.249.254 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default mount: server 10.0.249.254 not responding, timed out Root-NFS: Server returned error -5 while mounting /tftpboot/lts/ltsroot VFS: Unable to mmount root fs via NFS, trying floppy. VFS: Cannot open root device "nfs" or 02:00 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 02:00 ============================================================== So...What's the problem? What can I do? It's 3:49am and I'm going to bed now.. Will check email again in a few hours.. --Thanks in advance to anyone who responds.. On Fri, 1 Mar 2002, mslicker wrote: > > I tried using the dhcpd.conf linked in the contribs section for booting > ThinkNICs by means of PXE. It doesn't work.. I don't even get dhcp. > > Prior to this, my LTSP terminal based on a Boot ROM was working fine. I > tried putting in just the lines pertaining to the ThinkNIC to this working > dhcpd.conf file and it didn't work either.. > > The ThinkNIC did get dhcp with the standard method I had been using prior. > Here's what my dhcpd.conf looks like (modified from the ThinkNIC version > in the contrib area of LTSP.org) followed by the older, working version: > > ======================<< From Contrib for ThinkNIC PXE >>=============== > option subnet-mask 255.255.255.0; > option broadcast-address 10.0.249.255; > option routers 10.0.249.254; > option domain-name-servers 10.0.249.254; > option domain-name "simpflex1.com"; > option netbios-name-servers 10.0.249.254; > > > subnet 10.0.249.0 netmask 255.255.255.0 { > range dynamic-bootp 10.0.249.180 10.0.249.189; > use-host-decl-names on; > option log-servers 10.0.249.254; > allow unknown-clients; > filename "vmlinuz.all"; > next-server 10.0.249.254; > > host peaches { > hardware ethernet 00:40:9F:30:01:78; > fixed-address 10.0.249.99; > } > host ws100 { > hardware ethernet 00:E0:06:F5:A8:DD; > fixed-address 10.0.249.190; > filename "pxelinux.0"; > option dhcp-class-identifier "PXEClient"; > option vendor-encapsulated-options > >09:0f:80:00:0c:4e:65:74:77:6f:72:6b:20:62:6f:6f:74:0a:07:00:50:72:6f:6d:70:74:06:01:02:08:03:80:00:00:47:04:80:00:00:00:ff; > } > } > > > ==============<< Older Working version with LTSP Boot ROM >>============ > # Sample configuration file for ISCD dhcpd > # > # Don't forget to set run_dhcpd=1 in /etc/init.d/dhcpd > # once you adjusted this file and copied it to /etc/dhcpd.conf. > # > > ddns-update-style ad-hoc; > default-lease-time 21600; > max-lease-time 21600; > > option subnet-mask 255.255.255.0; > option broadcast-address 10.0.249.255; > option routers 10.0.249.254; > option domain-name-servers 10.0.249.254; > option domain-name "simpflex1.com"; > option root-path "10.0.249.3:/opt/ltsp/i386"; > option option-128 code 128 = string; > option option-129 code 129 = text; > > shared-network WORKSTATIONS { > subnet 10.0.249.0 netmask 255.255.255.0 { > } > } > > group { > use-host-decl-names on; > option log-servers 10.0.249.3; > > host ws01 { > hardware ethernet 00:D0:09:30:6A:1C; > fixed-address 10.0.249.180; > filename "lts/vmlinuz-2.4.9-ltsp-5"; > ## option option-128 e4:45:74:68:00:00; > ## option option-129 "NIC=tulip"; > } > host kds { > hardware ethernet 00:40:F4:17:98:CB; > fixed-address 10.0.249.181; > # filename "lts/vmlinuz-2.4.9-ltsp-5"; > ## option option-128 e4:45:74:68:00:00; > ## option option-129 "NIC=tulip"; > } > host nic91 { > hardware ethernet 00:E0:06:F5:A8:DD; > fixed-address 10.0.249.191; > filename "lts/vmlinuz-2.4.9-ltsp-5"; > } > } > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net