Yes,
I am using the default dhcpd that coems with Mandrake 8.1 which is:
3.0-0.rc12.1mdk
Anythign else that might be wrong?
--Matthew
On Sat, 2 Mar 2002 [EMAIL PROTECTED] wrote:
> mslicker,
>
> Did you update your dhcpd to ISC 3.0 ?
>
> That is required for booting PXE clients.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
>
> On Sat, 2 Mar 2002, mslicker wrote:
>
> >
> > Trying to make my ThinkNIC boot, I finally removed the "option
> > vendor-encapsulated-options ..." line out of dhcpd.conf and now it gets
> > DHCP and seems to try and boot.
> >
> > I also copied the default file to a file named after the hex values of
> > the client's IP, as specified in the HowTo.
> >
> > Now I am stuck at a point where the screen shows the following
> > as the last lines (exclusing the equals signs, of course):
> > ==============================================================
> > IP-Config: Got DHCP answer from 10.0.249.3, my address is 10.0.249.182
> > IP-Config: Complete:
> > device=eth0, addr=10.0.249.182, mask=255.255.255.0, gw=10.0.249.254,
> > host=ws182, domain=simpflex1.com, nis-domain=(none),
> > bootserver=10.0.249.3, rootserver=10.0.249.254,
> > rootpath=10.0.249.3:/opt/ltsp/i386
> > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > Looking up port of RPC 100003/2 on 10.0.249.254
> > portmap: server 10.0.249.254 not responding, timed out
> > Root-NFS: Unable to get nfsd port number from server, using default
> > mount: server 10.0.249.254 not responding, timed out
> > Root-NFS: Server returned error -5 while mounting /tftpboot/lts/ltsroot
> > VFS: Unable to mmount root fs via NFS, trying floppy.
> > VFS: Cannot open root device "nfs" or 02:00
> > Please append a correct "root=" boot option
> > Kernel panic: VFS: Unable to mount root fs on 02:00
> >
> > ==============================================================
> >
> > So...What's the problem? What can I do? It's 3:49am and I'm going to bed
> > now.. Will check email again in a few hours..
> >
> > --Thanks in advance to anyone who responds..
> >
> >
> >
> > On Fri, 1 Mar 2002, mslicker wrote:
> >
> > >
> > > I tried using the dhcpd.conf linked in the contribs section for booting
> > > ThinkNICs by means of PXE. It doesn't work.. I don't even get dhcp.
> > >
> > > Prior to this, my LTSP terminal based on a Boot ROM was working fine. I
> > > tried putting in just the lines pertaining to the ThinkNIC to this working
> > > dhcpd.conf file and it didn't work either..
> > >
> > > The ThinkNIC did get dhcp with the standard method I had been using prior.
> > > Here's what my dhcpd.conf looks like (modified from the ThinkNIC version
> > > in the contrib area of LTSP.org) followed by the older, working version:
> > >
> > > ======================<< From Contrib for ThinkNIC PXE >>===============
> > > option subnet-mask 255.255.255.0;
> > > option broadcast-address 10.0.249.255;
> > > option routers 10.0.249.254;
> > > option domain-name-servers 10.0.249.254;
> > > option domain-name "simpflex1.com";
> > > option netbios-name-servers 10.0.249.254;
> > >
> > >
> > > subnet 10.0.249.0 netmask 255.255.255.0 {
> > > range dynamic-bootp 10.0.249.180 10.0.249.189;
> > > use-host-decl-names on;
> > > option log-servers 10.0.249.254;
> > > allow unknown-clients;
> > > filename "vmlinuz.all";
> > > next-server 10.0.249.254;
> > >
> > > host peaches {
> > > hardware ethernet 00:40:9F:30:01:78;
> > > fixed-address 10.0.249.99;
> > > }
> > > host ws100 {
> > > hardware ethernet 00:E0:06:F5:A8:DD;
> > > fixed-address 10.0.249.190;
> > > filename "pxelinux.0";
> > > option dhcp-class-identifier "PXEClient";
> > > option vendor-encapsulated-options
> > >
>09:0f:80:00:0c:4e:65:74:77:6f:72:6b:20:62:6f:6f:74:0a:07:00:50:72:6f:6d:70:74:06:01:02:08:03:80:00:00:47:04:80:00:00:00:ff;
> > > }
> > > }
> > >
> > >
> > > ==============<< Older Working version with LTSP Boot ROM >>============
> > > # Sample configuration file for ISCD dhcpd
> > > #
> > > # Don't forget to set run_dhcpd=1 in /etc/init.d/dhcpd
> > > # once you adjusted this file and copied it to /etc/dhcpd.conf.
> > > #
> > >
> > > ddns-update-style ad-hoc;
> > > default-lease-time 21600;
> > > max-lease-time 21600;
> > >
> > > option subnet-mask 255.255.255.0;
> > > option broadcast-address 10.0.249.255;
> > > option routers 10.0.249.254;
> > > option domain-name-servers 10.0.249.254;
> > > option domain-name "simpflex1.com";
> > > option root-path "10.0.249.3:/opt/ltsp/i386";
> > > option option-128 code 128 = string;
> > > option option-129 code 129 = text;
> > >
> > > shared-network WORKSTATIONS {
> > > subnet 10.0.249.0 netmask 255.255.255.0 {
> > > }
> > > }
> > >
> > > group {
> > > use-host-decl-names on;
> > > option log-servers 10.0.249.3;
> > >
> > > host ws01 {
> > > hardware ethernet 00:D0:09:30:6A:1C;
> > > fixed-address 10.0.249.180;
> > > filename "lts/vmlinuz-2.4.9-ltsp-5";
> > > ## option option-128 e4:45:74:68:00:00;
> > > ## option option-129 "NIC=tulip";
> > > }
> > > host kds {
> > > hardware ethernet 00:40:F4:17:98:CB;
> > > fixed-address 10.0.249.181;
> > > # filename "lts/vmlinuz-2.4.9-ltsp-5";
> > > ## option option-128 e4:45:74:68:00:00;
> > > ## option option-129 "NIC=tulip";
> > > }
> > > host nic91 {
> > > hardware ethernet 00:E0:06:F5:A8:DD;
> > > fixed-address 10.0.249.191;
> > > filename "lts/vmlinuz-2.4.9-ltsp-5";
> > > }
> > > }
> > >
> > >
> > >
> > > _____________________________________________________________________
> > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> > >
> >
> >
> > _____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> >
>
> --
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
