You've done man mkinitrd ? Tarjei
John O'Gorman wrote: >After a few weeks of prayer and fasting, I think I now know what >must be done to allow LTSP to work with the new SiS630ET chip. > >From a remark by Ken Yap, I infer that the sis900.o file must be >in the initrd file image which is tacked onto the kernel image. > >So I think that I need to: > 1. Recompile the 2.4.9 kernel with a (slightly modified) sis900.c > file from the 2.4.18 source. > > 2. make the bzImage of the new 2.4.9 kernel (although this may not > be necessary as the kernel itself will be no different, just > the sis900.o module). > > 3. build a new initrd and connect this to the kernel using mknbi > from the etherboot package. > >My problem: I don't know how to make the new initrd. I cannot find >any relevant INSTALL, README, or HOWTO on this topic. > > >All the other LTSP stuff has come in RPM files which have installed into >/opt/ltsp/i386 > >The initrd_kit is a tar.gz file. > >Where should I unload it? in /usr/src/linux2.4.9 (where the kernel is) > or into /opt/ltsp/i386? > >Having untarred the initrd_kit into the right place, what do I do >next. (There is a buildk script. Do I run that.) > >Any help would we much appreciated. > >John O'Gorman > >_____________________________________________________________________ >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net