At 16:44 12/05/02 -0400, you wrote:
>Remi,
>
>Are you sure that tftpd is installed ?
>
>It doesn't install by default on Mandrake.
I know that mandrake doesn't install it by default, and of course I
installed it.
>Then, when you think you've got it installed and running,
>do this to see:
>
> netstat -anp | grep ":69 "
>
>That should produce a line showing that it is listening on
>port 69.
>
>If you don't see that, then it still isn't configured
>correctly.
I'm going to test this.
If this doesnt appear, what else could I do ?
I've read the whole ltsp documentation (especially the troubleshooting
section), nothing have helped me.
Regards,
Remi.
>On Sun, 12 May 2002, Remi BERNHARD wrote:
>
> > Hi again,
> >
> > I just finished to setup my Linux Mandrake 8.2 server, and installed LTSP.
> > I also make the diskette to boot on my laptop 486 with a 3c589 nic, with
> > the package "wireless ltsp".
> >
> > ------------------------------------------------------------------
> > On the server :
> > - DHCP is running, I copy the dhcp.conf.example to dhcp.conf, and I
> > changed the IP adress of the server
> > - Tftp is not started when I look on the Mandrake 8.2 control
> center ->
> > services. I ran a
> > service xinetd restart to make shure tftp is running, but I still have no
> > tools to really see if it's started.
> > ------------------------------------------------------------------
> >
> > On the terminal x :
> > - when I boot the nic seems to be ok, but :
> > "eth0 : 3Com 3c589, io 0x300, irq 3, hw_addr 00:a0:24:65:c9:8c
> > 8k FIFO split 5:3 Rx:Tx, auto xcvr
> > cardmgr[36] : executing :' ./network start eth0'
> > cardmgr[36] : + Running dhclient
> > eth: flipped to 10 base T
> >
> > ERROR ! No dhcpcd-eth0.info file.
> > This usually indicate that dhclient did not get a response frome
> the DHCP
> > server, or the NIC driver isn't workiung properly with the network card
> >
> > Kernel panic: attempte to kill init !
> > eth0: flipped to 10 base T"
> > ------------------------------------------------------------------
> >
> > When I test my DHCP server, it's running, so I don't understand where it
> > comes from.
> > I tried my DHCP server with a windows98 host, and it works, my win98
> > computer get an ip adress.
> >
> > Rergards,
> > Remi.
> >
> >
> > _______________________________________________________________
> >
> > Have big pipes? SourceForge.net is looking for download mirrors. We supply
> > the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
> > _____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> >
>
>--
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
