Mike, It's probably not a PXE problem. PXE takes care of getting the kernel into memory. after that, it is done.
You clearly have a kernel in memory. So, it is more likely a problem with the configuration on the server. Is the IP address of the server 192.168.16.130 ? is NFS running on that server ? Is the workstation listed in the /etc/hosts file on that server ? Is /etc/hosts.allow setup to allow connections from the workstation ? Do you have ipchains or iptables running to block access ? Is your /etc/exports file setup correctly ? Have you looked at the troubleshooting section of the LTSP-3.0 documentation ? Hope that helps, Jim McQuillan [EMAIL PROTECTED] On Tue, 30 Jul 2002, Mike Arends wrote: > Hi there, > > I'm failing to mount an NFS filesystem during PXE boot proces: > > > > > Running dhclient > Mounting root filesystem: /opt/ltsp/i386 from 192.168.16.130 > (null)mount: nfsmount failed. Bad file number > NFS: Mount program didn't pass remote address! > mount: Mounting 192.168.16.130:/opt/ltsp/i386 on /mnt failed: Invalid argument > > > > > I can't seem to find out what causes this problem during PXE boot. > > Any ideas? > > Thanks in advance. > > Mike > > > ------------------------------------------------------- > This sf.net email is sponsored by: Dice - The leading online job board > for high-tech professionals. Search and apply for tech jobs today! > http://seeker.dice.com/seeker.epl?rel_code1 > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today! http://seeker.dice.com/seeker.epl?rel_code=31 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
