Dear friends,
I am trying to setup a workstation (Pentium 75, onboard video) with LTSP;
I have several other terminals working just fine. This particular machine is
giving me a problem, and I am having troubles to fix it.
Here is the situation:
When I attempted to fire it up using the onboard video card, it loads X just
fine, and allow me to enter KDE, run applications, etc. Only thing is, the
screen flickers badly, making the terminal very, very hard to use.
I blamed the video card for lack of better culprit, and tried a couple of
other PCI video boards : trident TGUI9440-1, TGUI9440-3
The system goes through the loading process, but when it attempts to start X
it shows a series of lines with messages like:
<snip>
(--) S3..Mode "800x600" needs hsync freq 65.82 khertz. deleted
^^^ ^^^
<snip>
***Note: each of the lines has different values for the numbers marked
above....
It does that about 3 or 4 times, then it gives up, with the message:
<snip>
Warning : the directory usr/x11r6/lib/x11/fonts/100dpi does not exist. Entry
deleted from font path
None of the configuration devices were detected.
Fatal server error.
No screens found
<snip>
Any help?
Thanks beforehand,
Rafael.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
