I just did this one myself, and I love the simpicity.
just after the to lts.conf lines you have posted you typpe...
PRINTER_1_DEVICE = "dev/lp1"
PRINTER_1_TYPE = "(P or S?)"
for a third, replace _1_ with _2_, three is the max.
On Tue, 25 Feb 2003, gabriel lopez wrote:
>
> I am trying to set a paralell Canon BJC-4300 printer in a terminal so i
> include the following commands on lts.conf.
> PRINTER_0_DEVICE = "/dev/lp0"
> PRINTER_0_TYPE = "P"
> The printer did not work and the printer did not show on the printers list.
> Then i gave a Fixed ip address to the terminal and ran on the server the
> utility to add a new printer and declared it as JETDIRECT and set it to the
> terminals IP. and also configure it with the appropiate driver.
> Now the printer shows on the printers list and is accesible to other
> terminals.
>
> Is this the way to do it? or is there a easier one. This question may sound
> dumb but suppose that i want to have two printers on this terminals. If i
> use this method, how do i declare the second one?
> Gabriel Lopez
>
>
>
> _________________________________________________________________
>
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
>
-------------------------------------------------------
This SF.net email is sponsored by: Scholarships for Techies!
Can't afford IT training? All 2003 ictp students receive scholarships.
Get hands-on training in Microsoft, Cisco, Sun, Linux/UNIX, and more.
www.ictp.com/training/sourceforge.asp
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
