Setting up another LTSP workstation. This one is an IBM Netfinity 3500. When it boots, it receives the correct IP from DHCP and scrolls through several screens worth very quickly. Then the screen clears in anticipation of the login screen but just sits there blank (gray, no X)
Background: Disabled the onboard NIC and added a Linksys LNE100TX (the same as all the others). Disabled the SCSI drive. Installed a IDE drive with RH8.0 for thick stuff. It boots from the floppy first. I am using the same (tested) floppy from another LTSP client. Used the same NIC (MAC address) from another successful ws. Any ideas where to start looking. Thanks, George ------------------------------------------------------- This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net