Do you try to say microsoft in protocol ? I just try this and is the same actually I try with "auto" because I don't know whats happenig here.
Bruno El Mar 27 May 2003 02:23, escribió: > try x mouse protocol = microdoft. Do you get i modprobe error in runlevel 3 > when booting?? > > n Mon, 26 May 2003, you wrote: > > Yes here is , the error in the terminal is can' t open serial device > > /dev/ttyS0 or something else and the mouse is conected and chequed that > > it works ok in this port , I dont't know what is wrong > > I would apreciate your help. > > > > Thanks in advance > > > > ///////////////////////////////////////////////////////////////////////// > >///// # > > # Config file for the Linux Terminal Server Project (www.ltsp.org) > > # > > > > [Default] > > SERVER = 192.168.10.254 > > XSERVER = auto > > X_MOUSE_PROTOCOL = "PS/2" > > X_MOUSE_DEVICE = "/dev/psaux" > > X_MOUSE_RESOLUTION = 400 > > X_MOUSE_BUTTONS = 3 > > USE_XFS = N > > LOCAL_APPS = N > > RUNLEVEL = 5 > > > > #------------------------------------------------------------------------ > >------ # > > # Example of specifying X settings for a workstation > > # > > [ws001] > > XSERVER = auto > > LOCAL_APPS = N > > USE_NFS_SWAP = N > > SWAPFILE_SIZE = 48m > > RUNLEVEL = 5 > > X_MOUSE_PROTOCOL = "Auto" > > X_MOUSE_DEVICE = "/dev/ttyS0" > > X_MOUSE_RESOLUTION = 50 > > X_MOUSE_BUTTONS = 2 > > X_MOUSE_EMULATE3BTN = Y > > > > [ws002] > > XSERVER = XF86_SVGA > > LOCAL_APPS = N > > USE_NFS_SWAP = N > > SWAPFILE_SIZE = 64m > > RUNLEVEL = 3 > > > > # > > # ws004 is my virtual workstation running in a VMware session > > # > > [ws004] > > DNS_SERVER = 192.168.10.254 > > XSERVER = auto > > X4_BUSID = "PCI:0:15:0" > > X_MODE_0 = 800x600 > > LOCAL_APPS = N > > USE_NFS_SWAP = N > > SWAPFILE_SIZE = 64m > > RUNLEVEL = 5 > > > > #------------------------------------------------------------------------ > >------ # > > # Example of a workstation configured to load some modules > > # > > #[ws001] > > # MODULE_01 = agpgart.o # This is for i810 video > > # MODULE_02 = uart401.o > > # MODULE_03 = sb.o io=0x220 irq=5 dma=1 > > # MODULE_04 = opl3.o > > > > #------------------------------------------------------------------------ > >------ # > > # Example of ws001 configured for local apps > > # > > #[ws001] > > # LOCAL_APPS = Y > > # LOCAL_WM = Y > > # NIS_DOMAIN = ltsp > > # NIS_SERVER = 192.168.0.254 > > > > #------------------------------------------------------------------------ > >------ # > > # Example of a serial printer attached to /dev/ttyS1 on workstation ws001 > > # > > #[ws001] > > # PRINTER_0_DEVICE = /dev/ttyS1 > > # PRINTER_0_TYPE = S # P-Parallel, S-Serial > > # PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100 > > # PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600 > > # PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF), > > # # H-Hardware (CTS/RTS) > > # PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd > > # # (defaults to 'N') > > # PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8) > > > > ///////////////////////////////////////////////////////////////////////// > >//////////////////////////////////////////////////////////// > > > > El Lun 26 May 2003 11:00, escribió: > > > Bruno Luciani a écrit: > > > >I have problem configuring my terminal with serial mouse > > > >Using default setup for ltsp.conf ( ps2 mouse) > > > > > > > >my terminal startx ok but mouse don't work ( is a serial mouse :-) > > > >but when I change setup to correct devide ttyS0 and Microsoft type > > > >X don't start anymore > > > > > > > >I am using Mandrake 9.1 and the last version of ltsp. > > > > > > > >thanks for any help > > > > > > > >Bruno Luciani > > > >Buenos Aires > > > >Argentina > > > > > > > > > > > >------------------------------------------------------- > > > >This SF.net email is sponsored by: ObjectStore. > > > >If flattening out C++ or Java code to make your application fit in a > > > >relational database is painful, don't do it! Check out ObjectStore. > > > >Now part of Progress Software. http://www.objectstore.net/sourceforge > > > >_____________________________________________________________________ > > > >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > >For additional LTSP help, try #ltsp channel on irc.freenode.net > > > > > > can you copy your lst.conf > > > Jean Christophe > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: ObjectStore. > > If flattening out C++ or Java code to make your application fit in a > > relational database is painful, don't do it! Check out ObjectStore. > > Now part of Progress Software. http://www.objectstore.net/sourceforge > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
