On Tue, 2003-10-07 at 11:50, Joseph Syjuco wrote:
> oops sorry that was 10ec:8139
> On Tue, 2003-10-07 at 11:21, [EMAIL PROTECTED] wrote:
> > On Tue, 7 Oct 2003, Joseph Syjuco wrote:
> > 
> > > Hi Jim, 
> > > Thanks for the reply
> > > I double checked it using lspci and i did get 1039:8139.  The bios
> > > settings of the machine is also ok since it boots from the network using
> > > a 3c905 card
> > 
> > Are you sure about those PCI values:  You said '1039:8139'  ?
> > 
> > Jim.
> > 
> > 
> > 
> > 
> > > 
> > > On Tue, 2003-10-07 at 10:42, [EMAIL PROTECTED] wrote:
> > > > Joseph,
> > > > 
> > > > The first thing I'd look for is the cards PCI Vendor and Device ID.
> > > > 
> > > > if you can put the card in a machine and boot linux from a harddisk,
> > > > then run:   lspci -n
> > > > 
> > > > Look for the lines that say 'Class 0200'.  Those are the network cards.
> > > > 
> > > > See if you get the proper 10ec:8139 value.
> > > > 
> > > > Also, check the bios settings on your machine.  On some, you need
> > > > to enable 'Boot from LAN' to make it work.
> > > > 
> > > > Jim McQuillan
> > > > [EMAIL PROTECTED]
> > > > 
> > > > 
> > > > On Tue, 7 Oct 2003, Joseph Syjuco wrote:
> > > > 
> > > > > hi
> > > > > i cant enable network boot using my rt8139 card.  ive downloaded the
> > > > > zrom file for rt8139(10ec, 8139), put it in my nm27c256 rom, used
> > > > > software to enable the lan card's boot rom and configured bios to boot
> > > > > from network but the non system disk error is still there.  ive tested
> > > > > this on 2 lan cards (both rtl8139) but neither worked.  what setting/
> > > > > procedure have i missed? are there any other etherboot images that also
> > > > > work with the card assuming the rtl8139 code is not compatible with my
> > > > > card ... i have experienced this with my cnet an983b card ... using disk
> > > > > it boots with an983b image but doesnt when i used a boot rom withthe
> > > > > zrom image.  ive tested the card with a boot disk and it works.  ive
> > > > > been dealing with this for 3 days and i cant figure out whats wrong
> > > > > TIA
> > > > > 
> > > > 
> > > > 
> > > > 
> > > > -------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > Welcome to geek heaven.
> > > > http://thinkgeek.com/sf
> > > > _____________________________________________________________________
> > > > Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
> > > >       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > > > For additional LTSP help,   try #ltsp channel on irc.freenode.net
> > > 
-- 
Joseph Syjuco <[EMAIL PROTECTED]>
Advanced Science and Technology Institute



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to