Tamer,

You are setting the wrong value in XSERVER.

You simply need:

    XSERVER = savage

NOT

    XSERVER = savage_drv.o



Jim McQuillan
[EMAIL PROTECTED]



On Thu, 22 Apr 2004, Tamer SAFAK wrote:

> I installed LTSP 3.0 to my RedHat 9.0.
> ltsp_core 3.0.9
> ltsp_kernel-3.0.13
> ltsp_x_core-3.0.4(XFree86-4.2.99) etc... were installed.
> 
> Terminal ws001 ---> onboard i810 vga
> Terminal ws002 ---> onboard savagePRO monitor don't support 1024x768 (old 
> model)
> 
> when I choosed init-3, terminals were connecting correctly.
> for init-5 lts.conf is as fallow.
> 
> [ws002]
>         XSERVER            = auto
>         LOCAL_APPS         = N
>         USE_NFS_SWAP       = N
>         SWAPFILE_SIZE      = 48m
>         RUNLEVEL           = 5
> 
> [ws002]
>         XSERVER            = auto
>         LOCAL_APPS         = N
>         USE_NFS_SWAP       = N
>         SWAPFILE_SIZE      = 48m
>         RUNLEVEL           = 5
> result:
> terminal 1 gave me this massage:
> 
> ERROR: Auto probe of the video card failed!
>       You need to specify the proper X server in lts.conf
> 
> monitor goes down in terminal 2.
> 
> I changed XSERVER to XFree86 instead of auto. The most video cards are 
> supported XFree86  >= 4.11...as ltsp documentation said 
> [ws002]
>         XSERVER            = XFree86
>         LOCAL_APPS         = N
>         USE_NFS_SWAP       = N
>         SWAPFILE_SIZE      = 48m
>         RUNLEVEL           = 5
> 
> [ws002]
>         XSERVER            = XFree86
>         LOCAL_APPS         = N
>         USE_NFS_SWAP       = N
>         SWAPFILE_SIZE      = 48m
>         RUNLEVEL           = 5
> 
> result was as follow.
> Both of them gave same messages,
> 
> using config file: "/etc/XFree86Config"
> Failed to load module "XFree86" (module does not exist, 0)
> 
> No drivers available.
> no secreens found
> 
> I found the drivers in located in "/opt/ltsp/i386/usr/X11R6/lib/modules/
> drivers". 
> I copied drivers to "/opt/ltsp/i386/lib/modules/2.4.24-ltsp-1/kernel/drivers/
> video"
> Notings changed.
> and I added follows lts.conf for ws002
> [ws002]
>       MODULE_01  =savage_drv.o
> result:
> loading savage_drv.o modprobe: Can't locate module savage_drv.o
> ERROR! loading module svage_drv.o failed.
> 
> Could you help me to solve this problem?I am waiting for your help.
> 
> In addition, why don't I see the contents of !XFree86Config, located "/opt/
> ltsp/i386/etc"
> 
> 
> Thanks much.
> 
> Tamer SAFAK
> SAKARYA LINUX MERKEZI
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.freenode.net
> 



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to