On Thu, 22 Apr 2004, Tamer SAFAK wrote: > Thanks. > Terminal 2 started successfully. > What must I do for terminal 1(i810). > Is there any list for vga card to configure XSERVER?
You should be able to set: XSERVER = i810 There isn't a list, but if you look in the /opt/ltsp/i386/usr/X11R6/lib/modules/drivers directory, anything that ends in '_drv.o' should be usable as a value for XSERVER. Just remember to remove the '_drv.o' when you put it in the lts.conf file. Jim McQuillan [EMAIL PROTECTED] > > Tamer SAFAK > SAKARYA LINUX MERKEZI > > > Per 22 Nis 2004 02:35 tarihinde, [EMAIL PROTECTED] şunları yazmıştı: > > Tamer, > > > > You are setting the wrong value in XSERVER. > > > > You simply need: > > > > XSERVER = savage > > > > NOT > > > > XSERVER = savage_drv.o > > > > > > > > Jim McQuillan > > [EMAIL PROTECTED] > > > > On Thu, 22 Apr 2004, Tamer SAFAK wrote: > > > I installed LTSP 3.0 to my RedHat 9.0. > > > ltsp_core 3.0.9 > > > ltsp_kernel-3.0.13 > > > ltsp_x_core-3.0.4(XFree86-4.2.99) etc... were installed. > > > > > > Terminal ws001 ---> onboard i810 vga > > > Terminal ws002 ---> onboard savagePRO monitor don't support 1024x768 (old > > > model) > > > > > > when I choosed init-3, terminals were connecting correctly. > > > for init-5 lts.conf is as fallow. > > > > > > [ws002] > > > XSERVER = auto > > > LOCAL_APPS = N > > > USE_NFS_SWAP = N > > > SWAPFILE_SIZE = 48m > > > RUNLEVEL = 5 > > > > > > [ws002] > > > XSERVER = auto > > > LOCAL_APPS = N > > > USE_NFS_SWAP = N > > > SWAPFILE_SIZE = 48m > > > RUNLEVEL = 5 > > > result: > > > terminal 1 gave me this massage: > > > > > > ERROR: Auto probe of the video card failed! > > > You need to specify the proper X server in lts.conf > > > > > > monitor goes down in terminal 2. > > > > > > I changed XSERVER to XFree86 instead of auto. The most video cards are > > > supported XFree86 >= 4.11...as ltsp documentation said > > > [ws002] > > > XSERVER = XFree86 > > > LOCAL_APPS = N > > > USE_NFS_SWAP = N > > > SWAPFILE_SIZE = 48m > > > RUNLEVEL = 5 > > > > > > [ws002] > > > XSERVER = XFree86 > > > LOCAL_APPS = N > > > USE_NFS_SWAP = N > > > SWAPFILE_SIZE = 48m > > > RUNLEVEL = 5 > > > > > > result was as follow. > > > Both of them gave same messages, > > > > > > using config file: "/etc/XFree86Config" > > > Failed to load module "XFree86" (module does not exist, 0) > > > > > > No drivers available. > > > no secreens found > > > > > > I found the drivers in located in "/opt/ltsp/i386/usr/X11R6/lib/modules/ > > > drivers". > > > I copied drivers to > > > "/opt/ltsp/i386/lib/modules/2.4.24-ltsp-1/kernel/drivers/ video" > > > Notings changed. > > > and I added follows lts.conf for ws002 > > > [ws002] > > > MODULE_01 =savage_drv.o > > > result: > > > loading savage_drv.o modprobe: Can't locate module savage_drv.o > > > ERROR! loading module svage_drv.o failed. > > > > > > Could you help me to solve this problem?I am waiting for your help. > > > > > > In addition, why don't I see the contents of !XFree86Config, located > > > "/opt/ ltsp/i386/etc" > > > > > > > > > Thanks much. > > > > > > Tamer SAFAK > > > SAKARYA LINUX MERKEZI > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.Net email is sponsored by: IBM Linux Tutorials > > > Free Linux tutorial presented by Daniel Robbins, President and CEO of > > > GenToo technologies. Learn everything from fundamentals to system > > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.freenode.net > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: IBM Linux Tutorials > > Free Linux tutorial presented by Daniel Robbins, President and CEO of > > GenToo technologies. Learn everything from fundamentals to system > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.freenode.net > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id70&alloc_id638&opÌk > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net