-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Am Samstag, 27. November 2004 18:07 schrieb Robin Bonin: > Hi guys, I'm kind of stuck. > I'm uaing a D-Link 530TX+ REV E1 network card. > I got the etherboot rom to work, and I'm now trying to get my DHCP > file to load the correct value. I'm not quite sure what the NIC=XX > value should be. I tried "dfe538" and "rtl8139" and neither one would > low. Where do I find this value?
For PCI NICs you won't need the NIC parameter in most cases. However, if it's a quite recent PCI code it possibly has not made it into the LTSP initrd's niclist file. In this case you could specify NIC= .... to workaround. Please quote the PCI ID for someone to add it to NICLIST, once you get it working. Which etherboot driver did you select? It often allows to conclude which Linux driver you need... (if it was 8139, there's a chance you need "rtl8139" or "8139too", for example) Regards Anselm -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBqZiNRGDyvz+XrnkRAh4nAJ9lvO0+bNxobsVsNEHAFOzLrf2/9gCg17vs zSBSMQ7SKsiphKLKHmPE6HY= =RxU0 -----END PGP SIGNATURE----- ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
