Joshua,
The LTSP print server does not emulate a Jetdirect print server.
There is no command line to access.
Pete Billson
--
http://www.elbnet.com
ELB Internet Service, Inc.
Web Design, Computer Consulting, Internet Hosting
Joshua N Pritikin wrote:
Is there any known deficiency with LTSP's JetDirect implementation?
When the printer is connected to the server via USB, everything works
fine. When I try to use hp-makeuri, the printer is not detected even
though CUPS can print to the printer on port 9100.
According to http://www.lprng.com/LPRng-Reference-Multipart/x5171.htm it
is possible to telnet to a JetDirect printer and use a command line
interface. When I try this with an LTSP remote printer, I get connected
but it seems like the help command "?" doesn't do anything.
I posted some questions to the HPLIP forum on sourceforge but, so far,
it seems like I am doing everything correctly.
-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
