Hi - I'm a newbie to using ltsp. I run SuSE 10.0 OSS on a Celeron-600 with 384MB RAM.
Recently I installed ltsp and have managed to get two workstations (both P1-120MHz) up and running, but not very well.
One of them [assigned ws002 by DHCP] has Windows 98 installed on the Hard Disk, and an older, serial ball mouse on one of the COM ports /dev/ttyS0 or /dev/ttyS1. The mouse is detected fine by windows, but not by XDMCP, so I can't use a mouse for the thin terminal; I haven't even thought seriously about trying to redirect sound yet!
In my /opt/ltsp/i386/etc/ltsp.conf file, this particular workstation includes a [ws002] section, with mouse sections setting the protocol to Microsoft, the number of buttons to 2, and emulating 3 buttons. The mouse device I have tried as both /dev/ttyS0 and /dev/ttyS1. I have played with the mode0 and mode1 lines to try to determine if the .conf file is being read correctly, and it doesn't seem to be: I can comment out the mode line for 800x600 resolution, enabling only the 640x480 resolution, and I still get X in 800x600.
What am I doing wrong? Is there a foolproof or idiot-proof way of establishing that the ltsp.conf file is being read and used correctly?
-- Pastor Martin Scharnke Dimboola Lutheran Parish 10 Ellerman Street, Dimboola VIC 3414 Ph/fax +61-3-5389 1360 mailto: [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
