Onsdag den 15. marts 2006 05:29 skrev Pastor Martin Scharnke:
> Hi - I'm a newbie to using ltsp.
>
> I run SuSE 10.0 OSS on a Celeron-600 with 384MB RAM.
>
> Recently I installed ltsp and have managed to get two workstations (both
> P1-120MHz) up and running, but not very well.
>
> One of them [assigned ws002 by DHCP] has Windows 98 installed on the
> Hard Disk, and an older, serial ball mouse on one of the COM ports
> /dev/ttyS0 or /dev/ttyS1. The mouse is detected fine by windows, but
> not by XDMCP, so I can't use a mouse for the thin terminal; I haven't
> even thought seriously about trying to redirect sound yet!
>
> In my /opt/ltsp/i386/etc/ltsp.conf file, this particular workstation
> includes a [ws002] section, with mouse sections setting the protocol to
> Microsoft, the number of buttons to 2, and emulating 3 buttons. The
> mouse device I have tried as both /dev/ttyS0 and /dev/ttyS1. I have
> played with the mode0 and mode1 lines to try to determine if the .conf
> file is being read correctly, and it doesn't seem to be: I can comment
> out the mode line for 800x600 resolution, enabling only the 640x480
> resolution, and I still get X in 800x600.
>
> What am I doing wrong? Is there a foolproof or idiot-proof way of
> establishing that the ltsp.conf file is being read and used correctly?
I've got one of these old mice too.
This is my setting (snip) from lts.conf
####### GL AMITECH M GL TASTATUR og GL MUS #############
[ws043]
XSERVER = cirrus
X_MOUSE_DEVICE = /dev/ttyS0
X_MOUSE_BAUD = 1200
X_MOUSE_PROTOCOL = microsoft
--
------------------------------
Med venlig hilsen/Best regards
Verner Kjærsgaard
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
