On Wed, Jul 2, 2008 at 8:04 PM, Shrenik Bhura <[EMAIL PROTECTED]> wrote: > Hello, > > I was installing KIWI-LTSP pre-built image as per instructions at > http://en.opensuse.org/LTSP. I have a few queries w.r.t it - > 1. Does the pre-built image mandate that the server IP must be > 10.0.0.254 or it may be configured in /etc/sysconfig/kiwi-ltsp followed > by kiwi-ltsp-setup -c or does it require giving the install source along > with the IP related changes followed by kiwi-ltsp-setup for making new > image?
Just change the server IP in /etc/sysconfig/kiwi-ltsp and run kiwi-ltsp-setup -c Best thing about "prebuilt" image is you do not need to rebuild image :) > 2. I already have a few services running on port 2000 which cannot be > changed due to dependencies. However, nbd-server also needs port 2000 > which I found that it can be changed in /etc/init.d/nbd-server. But even > after this change the clients do not boot and fail as they can't find > the image at port 2000. Doe this mean that the prebuilt image can only > work if 2000 port is free and nbd is listening at it. > Try nbdPort=2001 kernel parameter in /srv/tftpboot/pxelinux.cfg/default at the end of initrd line. Cheers -J ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net