Hi,
I configure my LTSP Server on a subnet 192.168.2.0.
It's working fine.
The Server is IP 192.168.2.5 (I m using only one IP)
The DHCP Server is manage by a windows
The PXE server is manage my LTSP Server.
So, LTSP works fine if the pc is plugged on the same hub.
If I plugged it behind a router on a different subnet (192.168.10.0)
PXE start and initialize LTSP.
but it stop after nfs-top:
Begin: Running /scripts/nfs-top...
Done.
[4294679.422000] NET: Registered protocol family 17
IP-Config: eth0 hardware address [Insert MAC Address here] into 1500 DHCP
RARP
So, what do I need to modify to be able to have LTSP Client on different
subnet?
or can I change the mask to 255.255.0.0?
Thanks for help.
Smad
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
