> Hi,
>
> I configure my LTSP Server on a subnet 192.168.2.0.
> It's working fine.
> The Server is IP 192.168.2.5 (I m using only one IP)
> The DHCP Server is manage by a windows
> The PXE server is manage my LTSP Server.
>
> So, LTSP works fine if the pc is plugged on the same hub.
> If I plugged it behind a router on a different subnet (192.168.10.0)
> PXE start and initialize LTSP.
> but it stop after nfs-top:
>
> Begin: Running /scripts/nfs-top...
> Done.
> [4294679.422000] NET: Registered protocol family 17
> IP-Config: eth0 hardware address [Insert MAC Address here] into 1500 DHCP
> RARP
>
>
> So, what do I need to modify to be able to have LTSP Client on different
> subnet?
> or can I change the mask to 255.255.0.0?
>
> Thanks for help.
> Smad
>
>
--
Cordialement / Sincerely
Damien HERITIER
MEP Volunteer Indonesia / Volontaire MEP Indonesia
http://www.mepasie.org
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
