On 30/05/2017 10:05 πμ, Rolf-Werner Eilert wrote:
Yes, as I've written above, BIOS screen is shown, and boot menu is
shown, and the first few seconds of booting are shown. Only when
graphics is switched from text to graphics mode, the monitor says "no
signal" and goes to sleep mode. The client keeps booting until LDM and
seems not to be aware of a missing monitor.
From epoptes, right click on the client, and select execute > open
terminal > root, locally.
There, type:
xrandr
and paste the output here, and then:
xrandr -s 800x600
and see if the screen now shows any output.
Maybe the client sends a bigger resolution than adapter/screen support.
If so, just use `xrandr -s xxx` until you find the proper one, and
finally put it in an lts.conf XRANDR_MODE_0 directive.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net