Hi I am using the DWL2100 unit from Dlink. After some reading on a product brochure I downloaded from their site, I think the solution to my problem was located in the form of the Super G support. I have gone ahead to enable Super G support which enables the radio to work at effective through put speeds of 60Mbps.
The signal quality is very good and there are no likely sources of interference along the path apart from a stray branch of a tree which from my monitoring has not caused much in loss terms. Will wait for reports from the client and confirm whether it worked or not. Wire > If I'm not wrong your problem is most likely to be the distance. With > wireless the further the links the lower the throughput. > > Try the same thing at 50 meters > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of >> [EMAIL PROTECTED] >> Sent: Wednesday, April 26, 2006 3:51 PM >> To: [email protected] >> Subject: [LUG] Link Encryption >> >> Hi All >> >> I recently set up a wireless point to point link with Dlink >> equipment. I enabled 152 bit encrytpion in the process of >> configuring the link. >> >> Currently am facing a problem with the client whenever they >> try to send 100Mb file sizes across the link. It takes for >> ever. Would the encryption be an issue? >> >> The link quality is 80% on average and the distance for the >> wireless link is not more than 150 metres. >> >> Any pointers will be appreciated. >> >> Wire James >> _______________________________________________ >> LUG mailing list >> [email protected] >> http://kym.net/mailman/listinfo/lug >> %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/ >> >> The above comments and data are owned by whoever posted them >> (including attachments if any). The List's Host is not >> responsible for them in any way. >> --------------------------------------- >> > > _______________________________________________ > LUG mailing list > [email protected] > http://kym.net/mailman/listinfo/lug > %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/ > > The above comments and data are owned by whoever posted them (including > attachments if any). The List's Host is not responsible for them in any > way. > --------------------------------------- > > _______________________________________________ LUG mailing list [email protected] http://kym.net/mailman/listinfo/lug %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/ The above comments and data are owned by whoever posted them (including attachments if any). The List's Host is not responsible for them in any way. ---------------------------------------
