Hello Lutenists, I need some help. Not with the fret knot itself or the like, but please bear with me: I stripped the fixed metal fret fingerboard from my lute & replaced it with a fretless fingerboard. I am not a luthier, just very careful. I did not bevel or fillet the edges of the fingerboard, at least not yet. I notice that the stress resulting from the nylon fret trying to make the sharp bend is lifting it up near the edge. That is, near the edge of the fingerboard there is a small gap or "daylight" under the fret. It is actually not all that small, big enough so that I can see that it will be a problem. I know this is not a lute building list but you can help me get playing again by looking at your lutes (assuming you are using tie on frets) and telling me if the edges are beveled or filleted, and if so, how much. And here is another question: if you lay a straight edge on your fingerboard, is it straight or crowned? I was careful to get mine really flat but now I wonder. Another related question I have is, nylon or gut for frets? I only have nylon right now. Is this stress effect peculiar to nylon? I would not think so since I notice that wrapped strings lift near the edge as well. Thank You All Very Much, -plh
To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
