When you give ab to 192.168.16.183:8080 it does not get 450 connections ? Do this:
#ipvsadm --zero Check to see if stats is zero for each server. Now use ab to server 192.168.16.183:8080 while the test are being use, see --conections, try to get like more than once. after test over, use --stats and post here again! I guess as you are seeing you can figureout By the way, is a choise of your to use wlc balancer and route in ipvs ? []'sf.rique On Thu, Oct 28, 2010 at 3:59 AM, Anil Pillai <[email protected]> wrote: > Below is the the output of commands. > > > [r...@dr01 ~]# ipvsadm -L -n > IP Virtual Server version 1.2.1 (size=4096) > Prot LocalAddress:Port Scheduler Flags > -> RemoteAddress:Port Forward Weight ActiveConn InActConn > TCP 192.168.16.183:8080 wlc > -> 192.168.16.178:8080 Route 1 0 59 > -> 192.168.16.176:8080 Route 1 0 59 > -> 192.168.16.177:8080 Route 1 0 81 > > [r...@dr01 ~]# ipvsadm -L -n --stats > IP Virtual Server version 1.2.1 (size=4096) > Prot LocalAddress:Port Conns InPkts OutPkts InBytes > OutBytes > -> RemoteAddress:Port > TCP 192.168.16.183:8080 23514 164005 0 23122438 > 0 > -> 192.168.16.178:8080 8532 59554 0 8380480 > 0 > -> 192.168.16.176:8080 7628 53138 0 7459184 > 0 > -> 192.168.16.177:8080 7354 51313 0 7282774 > 0 > > [r...@dr01 ~]# ipvsadm -L -n --connection > IPVS connection entries > pro expire state source virtual destination > > --connection, didn;t give any output. > > Yes, i get 150 on each server when tested simultaneously. > > > On Wed, Oct 27, 2010 at 8:03 PM, Henrique Fernandes <[email protected] > >wrote: > > > Can you please post the outputs of this comands in the diretord. > > > > #ipvsadm -L -n > > > > #ipvsadm -L --n --stats > > > > #ipvsadm -L -n --connection > > > > > > And if you use ab to test both servers at same time you get 150 on each ? > > > > > > > > []'sf.rique > > > > > > On Wed, Oct 27, 2010 at 10:50 AM, Anil Pillai <[email protected]> > wrote: > > > > > Hi, > > > > > > I have a LVS/DR setup (ldirectord) with One Director and two Real > > Servers. > > > On Real Servers i have Apache Webserver running on port 8080. > > > Each Apache is capable of serving 150 TPS. > > > Now when i did load testing via Virtual IP, i am still getting same TPS > > > (150). > > > For load testing i have used apache benckmark (ab) tool. > > > As per my understanding via Load Balancer (VIP) TPS should increase and > > > should get around 300 TPS. > > > > > > Not sure where i am going wrong. Can anyone help me on this ? > > > > > > Below is the Setup Details: > > > > > > Director (Just acts as director only): > > > > > > 10.50.57.55 -> Virtual IP > > > 10.50.57.45 -> Physical IP > > > > > > Real Server 1: > > > 10.50.57.22 -> Physical IP on eth0 > > > lo:0 Link encap:Local Loopback > > > > > > inet addr:10.50.57.55 Mask:255.255.255.255 > > > > > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > > > > > Real Server 2: > > > 10.50.57.23 -> Physical IP on eth0 > > > lo:0 Link encap:Local Loopback > > > > > > inet addr:10.50.57.55 Mask:255.255.255.255 > > > > > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > > > > > # Global Directives > > > checktimeout=3 > > > checkinterval=6 > > > autoreload=yes > > > logfile="/var/log/ldirectord.log" > > > quiescent=yes > > > # HTTP services > > > virtual=10.50.57.55:8080 > > > service=http > > > scheduler=rr > > > protocol=tcp > > > checktype=negotiate > > > real=10.50.57.22:8080 > > > real=10.50.57.23:8080 > > > request="test/lvs.html" > > > receive="Test Page" > > > > > > > > > Added Below line in sysctl.conf on Real Servers: > > > net.ipv4.conf.lo.arp_ignore = 1 > > > net.ipv4.conf.lo.arp_announce = 2 > > > net.ipv4.conf.all.arp_ignore = 1 > > > net.ipv4.conf.all.arp_announce = 2 > > > > > > > > > Regards, > > > _______________________________________________ > > > Please read the documentation before posting - it's available at: > > > http://www.linuxvirtualserver.org/ > > > > > > LinuxVirtualServer.org mailing list - [email protected] > > > Send requests to [email protected] > > > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > > > > > _______________________________________________ > > Please read the documentation before posting - it's available at: > > http://www.linuxvirtualserver.org/ > > > > LinuxVirtualServer.org mailing list - [email protected] > > Send requests to [email protected] > > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > > > _______________________________________________ > Please read the documentation before posting - it's available at: > http://www.linuxvirtualserver.org/ > > LinuxVirtualServer.org mailing list - [email protected] > Send requests to [email protected] > or go to http://lists.graemef.net/mailman/listinfo/lvs-users > _______________________________________________ Please read the documentation before posting - it's available at: http://www.linuxvirtualserver.org/ LinuxVirtualServer.org mailing list - [email protected] Send requests to [email protected] or go to http://lists.graemef.net/mailman/listinfo/lvs-users
