>From LXC nothing: root@Oksymoron:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ^C
>From Host: root@ns321124:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default vss-gw-6k.fr.eu 0.0.0.0 UG 0 0 0 br0 10.0.3.0 * 255.255.255.0 U 0 0 0 lxcbr0 94.23.237.0 * 255.255.255.0 U 0 0 0 br0 2014-08-13 12:35 GMT+02:00 Tamas Papp <tom...@martos.bme.hu>: > Try traceroute, show route command output and things like that. > BTW you setup looks the same as before. > > tamas > > > > > On 08/13/2014 12:32 PM, bryn1u85 . wrote: > > Hey, > > I made some changes: > root@ns321124:~# cat /etc/network/interfaces > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > auto br0 > iface br0 inet static > bridge_ports eth0 > bridge_stp off > bridge_maxwait 0 > bridge_fd 0 > address 94.23.237.216 > netmask 255.255.255.0 > network 94.23.237.0 > broadcast 94.23.237.255 > gateway 94.23.237.254 > > post-up /sbin/ifconfig br0:0 91.121.239.228 netmask > 255.255.255.255 broadcast 91.121.239.228 > post-down /sbin/ifconfig br0:0 down > > > root@ns321124:~# cat /var/lib/lxc/Oksymoron/config > # Template used to create this container: > /usr/share/lxc/templates/lxc-ubuntu > # Parameters passed to the template: > # For additional config options, please look at lxc.container.conf(5) > > # Common configuration > lxc.include = /usr/share/lxc/config/ubuntu.common.conf > > # Container specific configuration > lxc.rootfs = /var/lib/lxc/Oksymoron/rootfs > lxc.mount = /var/lib/lxc/Oksymoron/fstab > lxc.utsname = Oksymoron > lxc.arch = amd64 > > # Network configuration > lxc.network.type = veth > lxc.network.flags = up > lxc.network.link = br0 > lxc.network.name = eth0 > lxc.network.ipv4 = 91.121.239.228/32 > lxc.network.ipv4.gateway = 91.121.239.254 > lxc.network.hwaddr = 00:16:3e:3e:35:9e > > root@ns321124:~# ifconfig > br0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08 > inet addr:94.23.237.216 Bcast:94.23.237.255 Mask:255.255.255.0 > inet6 addr: fe80::230:48ff:febd:ee08/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1432 errors:0 dropped:4 overruns:0 frame:0 > TX packets:785 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:109849 (109.8 KB) TX bytes:149687 (149.6 KB) > > br0:0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08 > inet addr:91.121.239.228 Bcast:91.121.239.228 > Mask:255.255.255.255 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > eth0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1507 errors:0 dropped:0 overruns:0 frame:0 > TX packets:826 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:133897 (133.8 KB) TX bytes:163263 (163.2 KB) > Interrupt:16 Memory:fbce0000-fbd00000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:6 errors:0 dropped:0 overruns:0 frame:0 > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:370 (370.0 B) TX bytes:370 (370.0 B) > > #### LXC ### > > root@Oksymoron:~# lxc-console -n Oksymoron > > root@Oksymoron:~# cat /etc/network/interfaces > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > auto eth0 > iface eth0 inet dhcp > > > root@Oksymoron:~# ifconfig > eth0 Link encap:Ethernet HWaddr 00:16:3e:3e:35:9e > inet addr:91.121.239.228 Bcast:255.255.255.255 > Mask:255.255.255.255 > inet6 addr: fe80::216:3eff:fe3e:359e/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:489 errors:0 dropped:0 overruns:0 frame:0 > TX packets:60 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:41460 (41.4 KB) TX bytes:10332 (10.3 KB) > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:60 errors:0 dropped:0 overruns:0 frame:0 > TX packets:60 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:4966 (4.9 KB) TX bytes:4966 (4.9 KB) > > And failed: > > > root@Oksymoron:~# apt-get update > 0% [Connecting to archive.ubuntu.com] [Connecting to security.ubuntu.com] > 0% [Connecting to archive.ubuntu.com] [Connecting to security.ubuntu.com] > > I don;t know what can i do more > Please give me some advice > > > > > > 2014-08-13 10:29 GMT+02:00 Tamas Papp <tom...@martos.bme.hu>: > >> >> On 08/13/2014 10:28 AM, bryn1u85 . wrote: >> >>> Hey, >>> >>> what do u mean standard configuration ? >>> >>> >> man interfaces >> >> >> >> t >> _______________________________________________ >> lxc-users mailing list >> lxc-users@lists.linuxcontainers.org >> http://lists.linuxcontainers.org/listinfo/lxc-users >> > > > > _______________________________________________ > lxc-users mailing > listlxc-users@lists.linuxcontainers.orghttp://lists.linuxcontainers.org/listinfo/lxc-users > > > > _______________________________________________ > lxc-users mailing list > lxc-users@lists.linuxcontainers.org > http://lists.linuxcontainers.org/listinfo/lxc-users >
_______________________________________________ lxc-users mailing list lxc-users@lists.linuxcontainers.org http://lists.linuxcontainers.org/listinfo/lxc-users