Then make the changes, what I wrote and it will work.
tamas
On 08/13/2014 12:48 PM, bryn1u85 . wrote:
From LXC nothing:
root@Oksymoron:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
^C
From Host:
root@ns321124:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
default vss-gw-6k.fr.eu <http://vss-gw-6k.fr.eu> 0.0.0.0 UG
0 0 0 br0
10.0.3.0 * 255.255.255.0 U 0 0 0
lxcbr0
94.23.237.0 * 255.255.255.0 U 0 0 0 br0
2014-08-13 12:35 GMT+02:00 Tamas Papp <tom...@martos.bme.hu
<mailto:tom...@martos.bme.hu>>:
Try traceroute, show route command output and things like that.
BTW you setup looks the same as before.
tamas
On 08/13/2014 12:32 PM, bryn1u85 . wrote:
Hey,
I made some changes:
root@ns321124:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
bridge_ports eth0
bridge_stp off
bridge_maxwait 0
bridge_fd 0
address 94.23.237.216
netmask 255.255.255.0
network 94.23.237.0
broadcast 94.23.237.255
gateway 94.23.237.254
post-up /sbin/ifconfig br0:0 91.121.239.228 netmask
255.255.255.255 broadcast 91.121.239.228
post-down /sbin/ifconfig br0:0 down
root@ns321124:~# cat /var/lib/lxc/Oksymoron/config
# Template used to create this container:
/usr/share/lxc/templates/lxc-ubuntu
# Parameters passed to the template:
# For additional config options, please look at lxc.container.conf(5)
# Common configuration
lxc.include = /usr/share/lxc/config/ubuntu.common.conf
# Container specific configuration
lxc.rootfs = /var/lib/lxc/Oksymoron/rootfs
lxc.mount = /var/lib/lxc/Oksymoron/fstab
lxc.utsname = Oksymoron
lxc.arch = amd64
# Network configuration
lxc.network.type = veth
lxc.network.flags = up
lxc.network.link = br0
lxc.network.name <http://lxc.network.name> = eth0
lxc.network.ipv4 = 91.121.239.228/32 <http://91.121.239.228/32>
lxc.network.ipv4.gateway = 91.121.239.254
lxc.network.hwaddr = 00:16:3e:3e:35:9e
root@ns321124:~# ifconfig
br0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08
inet addr:94.23.237.216 Bcast:94.23.237.255
Mask:255.255.255.0
inet6 addr: fe80::230:48ff:febd:ee08/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1432 errors:0 dropped:4 overruns:0 frame:0
TX packets:785 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:109849 (109.8 KB) TX bytes:149687 (149.6 KB)
br0:0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08
inet addr:91.121.239.228 Bcast:91.121.239.228
Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr 00:30:48:bd:ee:08
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1507 errors:0 dropped:0 overruns:0 frame:0
TX packets:826 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:133897 (133.8 KB) TX bytes:163263 (163.2 KB)
Interrupt:16 Memory:fbce0000-fbd00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:370 (370.0 B) TX bytes:370 (370.0 B)
#### LXC ###
root@Oksymoron:~# lxc-console -n Oksymoron
root@Oksymoron:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
root@Oksymoron:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:3e:3e:35:9e
inet addr:91.121.239.228 Bcast:255.255.255.255
Mask:255.255.255.255
inet6 addr: fe80::216:3eff:fe3e:359e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:489 errors:0 dropped:0 overruns:0 frame:0
TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:41460 (41.4 KB) TX bytes:10332 (10.3 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:60 errors:0 dropped:0 overruns:0 frame:0
TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4966 (4.9 KB) TX bytes:4966 (4.9 KB)
And failed:
root@Oksymoron:~# apt-get update
0% [Connecting to archive.ubuntu.com <http://archive.ubuntu.com>]
[Connecting to security.ubuntu.com <http://security.ubuntu.com>]
0% [Connecting to archive.ubuntu.com <http://archive.ubuntu.com>]
[Connecting to security.ubuntu.com <http://security.ubuntu.com>]
I don;t know what can i do more
Please give me some advice
2014-08-13 10:29 GMT+02:00 Tamas Papp <tom...@martos.bme.hu
<mailto:tom...@martos.bme.hu>>:
On 08/13/2014 10:28 AM, bryn1u85 . wrote:
Hey,
what do u mean standard configuration ?
man interfaces
t
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
<mailto:lxc-users@lists.linuxcontainers.org>
http://lists.linuxcontainers.org/listinfo/lxc-users
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
<mailto:lxc-users@lists.linuxcontainers.org>
http://lists.linuxcontainers.org/listinfo/lxc-users
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
<mailto:lxc-users@lists.linuxcontainers.org>
http://lists.linuxcontainers.org/listinfo/lxc-users
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
http://lists.linuxcontainers.org/listinfo/lxc-users
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
http://lists.linuxcontainers.org/listinfo/lxc-users
