On Tue, Jan 28, 2020 at 04:33:32PM +0000, Tim Jaacks wrote:
> -----Ursprüngliche Nachricht-----
> Von: Serge E. Hallyn <se...@hallyn.com>
> Gesendet: Dienstag, 28. Januar 2020 16:59
> An: Tim Jaacks <tim.jaa...@garz-fricke.com>
> Cc: Serge E. Hallyn <se...@hallyn.com>; LXC users mailing-list
> <lxc-users@lists.linuxcontainers.org>
> Betreff: Re: [lxc-users] Device node in LXC is not accessible when connected
> via SSH
>
> > On Tue, Jan 28, 2020 at 03:47:57PM +0000, Tim Jaacks wrote:
> > > >On Tue, Jan 28, 2020 at 08:24:30AM +0000, Tim Jaacks wrote:
> > > >> Hello everyone,
> > > >>
> > > >> I have a problem where a physical hardware device passed through to an
> > > >> LXC container cannot be read from or written to when I am connected
> > > >> via SSH.
> > > >>
> > > >> The device node of my physical hardware device looks like this:
> > > >>
> > > >> myuser@myhost:~$ ls -la /dev/usb/hiddev0
> > > >> crw-rw-rw- 1 root root 180, 0 Jul 30 10:27 /dev/usb/hiddev0
> > > >>
> > > >> This is how I create and start my container:
> > > >>
> > > >> myuser@myhost:~$ sudo lxc-create -q -t debian -n mylxc -- -r
> > > >> stretch
> > > >> myuser@myhost:~$ sudo lxc-start -n mylxc
> > > >>
> > > >> Then I add the device node to the LXC:
> > > >>
> > > >> myuser@myhost:~$ sudo lxc-device -n mylxc add /dev/usb/hiddev0
> > > >>
> > > >> Afterwards the device is available in the LXC and I can read from it
> > > >> after having attached to the LXC:
> > > >>
> > > >> myuser@myhost:~$ sudo lxc-attach -n mylxc
> > > >> root@mylxc:/# ls -la /dev/usb/hiddev0
> > > >> crw-r--r-- 1 root root 180, 0 Aug 27 11:26 /dev/usb/hiddev0
> > > >> root@mylxc:/# cat /dev/usb/hiddev0
> > > >> ??????????^C
> > > >> root@mylxc:/#
> > > >>
> > > >> I then enable root access via SSH without a password:
> > > >>
> > > >> myuser@myhost:~$ sudo lxc-attach -n mylxc
> > > >> root@mylxc:/# sed -i 's/#\?PermitRootLogin.*/PermitRootLogin
> > > >> yes/g' /etc/ssh/sshd_config
> > > >> root@mylxc:/# sed -i
> > > >> 's/#\?PermitEmptyPasswords.*/PermitEmptyPasswords yes/g'
> > > >> /etc/ssh/sshd_config
> > > >> root@mylxc:/# sed -i 's/#\?UsePAM.*/UsePAM no/g'
> > > >> /etc/ssh/sshd_config
> > > >> root@mylxc:/# passwd -d root
> > > >> passwd: password expiry information changed.
> > > >> root@mylxc:/# /etc/init.d/ssh restart
> > > >> Restarting ssh (via systemctl): ssh.service.
> > > >> root@mylxc:/# exit
> > > >>
> > > >> When I connect via SSH now, the device node is there, but I cannot
> > > >> access it:
> > > >>
> > > >> myuser@myhost:~$ ssh root@<lxc-ip-address>
> > > >> root@mylxc:~# ls -la /dev/usb/hiddev0
> > > >> crw-r--r-- 1 root root 180, 0 Aug 27 11:26 /dev/usb/hiddev0
> > > >> root@mylxc:~# cat /dev/usb/hiddev0
> > > >> cat: /dev/usb/hiddev0: Operation not permitted
> > > >>
> > > >> In both cases (lxc-attach and ssh) I am the root user (verified via
> > > >> whoami), so this cannot be the problem.
> > > >>
> > > >> Why am I not allowed to access the device when I am connected via SSH?
> > > >
> > > > Can you look at your cgroup membership in both cases?
> > > >
> > >
> > > I am not sure what this means exactly. I have tried reading
> > > /proc/<pid>/cgroups of both the SSH process (upper) and the lxc-attach
> > > process (lower):
> > >
> > > tim.jaacks@a048:~$ cat /proc/26732/cgroup
> > > 11:pids:/lxc/mylxc/system.slice/ssh.service
> > > 10:net_cls,net_prio:/lxc/mylxc
> > > 9:perf_event:/lxc/mylxc
> > > 8:freezer:/lxc/mylxc
> > > 7:cpuset:/lxc/mylxc
> > > 6:rdma:/lxc/mylxc
> > > 5:memory:/lxc/mylxc
> > > 4:cpu,cpuacct:/lxc/mylxc
> > > 3:devices:/lxc/mylxc/system.slice/ssh.service
> > > 2:blkio:/lxc/mylxc
> > > 1:name=systemd:/lxc/mylxc/system.slice/ssh.service
> > > 0::/lxc/mylxc
> > >
> > > tim.jaacks@a048:~$ cat /proc/26600/cgroup
> > > 11:pids:/user.slice/user-1001.slice/session-1528.scope
> > > 10:net_cls,net_prio:/
> > > 9:perf_event:/
> > > 8:freezer:/user/root/0
> > > 7:cpuset:/
> > > 6:rdma:/
> > > 5:memory:/user/root/0
> > > 4:cpu,cpuacct:/user.slice
> > > 3:devices:/user.slice
> > > 2:blkio:/user.slice
> > > 1:name=systemd:/user/root/0
> > > 0::/user.slice/user-1001.slice/session-1528.scope
> > >
> > > Does this help? I have no idea what all these fields mean.
> >
> > Yes it does, thanks :) You want to look at the devices: lines in each.
> > The ssh session placed you in the container's devices cgroup,
> > /lxc/mylxc/system.slice/ssh.service . You could now
> >
> > cat /sys/fs/cgroup/devices/lxc/mylxc/system.slice/ssh.service/devices.list
> >
> > to see what devices you have access to that way.
>
> Thanks for your reply. I get the following list there:
>
> c *:* m
> b *:* m
> c 1:3 rwm
> c 1:5 rwm
> c 1:7 rwm
> c 5:0 rwm
> c 5:1 rwm
> c 5:2 rwm
> c 1:8 rwm
> c 1:9 rwm
> c 136:* rwm
> c 10:229 rwm
> c 254:0 rm
> c 10:200 rwm
> c 10:228 rwm
> c 10:232 rwm
>
> Since my USB device shows 180, 0 as major/minor-numbers, I assume I should
> add this to my container config:
>
> lxc.cgroup.devices.allow = c 180:* rwm
>
> Would that be correct?
Yes.
> > If you look at /proc/26600/cgroup , it is in /user.slice . Now, unless you
> > actually did "lxc-attach -e -n mylxc", that should not be right. You
> > should be placed in the container's cgroup, but you weren't. This may be a
> > bug.
> >
> > Ah, I see that result when I start unprivileged containers. Perhaps it
> > also happens when you start a root-owned container with subuid mappings?
> > Does your container have subuid mappings?
>
> So the process should not have access to the device either, do I get this
> right?
Right.
> I did not use the -e flag on lxc-attach (did everything just like stated in
> the original question), and I do not use subuid mappings. But I used sudo,
> because I created the container with sudo as well.
>
> In which cgroup should the process be?
You can do sudo lxc-info -n mylxc -H -p to get the pid of the
container init, so (as root)
awk -F: '/device/ { print $3 }' /proc/$(lxc-info -n mylxc -H -p)/cgroup
should show the right cgroup.
-serge
_______________________________________________
lxc-users mailing list
lxc-users@lists.linuxcontainers.org
http://lists.linuxcontainers.org/listinfo/lxc-users
