11.7k on 2 of mine.
On Oct 18, 2017 4:25 PM, "Stephen Adolph" <twospru...@gmail.com> wrote: > I can try to measure it later today for you. > > On Wed, Oct 18, 2017 at 4:24 PM, Stephen Adolph <twospru...@gmail.com> > wrote: > >> either the chip is a dud, or you have soldered it down in the wrong >> orientation (which is kinda easy to do)... Do you have more CPLDs? >> >> On Wed, Oct 18, 2017 at 4:22 PM, Josh Malone <josh.mal...@gmail.com> >> wrote: >> >>> Thanks for the leads. >>> >>> I removed the CPLD and the resistance from 3v3 to gnd went to open; >>> repopulated it and it went to 3-ohms. Dunno what to try next. Maybe >>> put the same CPLD back on an original REX board (non-castellated) and >>> see what happens. But, I'd *really* love for someone to measure the >>> resistance on a known-good REX board and let me know what it should >>> be. Assuming the CPLD draws <= 1ma (datasheet says 17uA standby), R >>> should be over ~3k. >>> >>> -Josh >>> >> >> >