Terminfo is below
---------------------------------
dt200|td200|Tandy 200,
am, bw, xt,
cols#40, lines#16,
bel=^G, clear=\Ej, cr=^M, nel=^M^J,
cuu1=\EA, cud1=\EB, cuf1=\EC, cub1=\ED, home=\EH,
kcuu1=^^, kcud1=^_, kcuf1=^\, kcub1=^],
ed=\EJ, el=\EK, il1=\EL, dl1=\EM,
cnorm=\EP, civis=\EQ,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
rev=\Ep, sgr0=\Eq, rmso=\Eq, smso=\Ep,
dt100|m100|Tandy 100,
am, bw, xt,
cols#40, lines#18,
bel=^G, clear=\Ej, cr=^M, nel=^M^J,
cuu1=\EA, cud1=\EB, cuf1=\EC, cub1=\ED, home=\EH,
kcuu1=^^, kcud1=^_, kcuf1=^\, kcub1=^],
ed=\EJ, el=\EK, il1=\EL, dl1=\EM,
cnorm=\EP, civis=\EQ,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
rev=\Ep, sgr0=\Eq, rmso=\Eq, smso=\Ep,
On Wed, Jul 11, 2018, at 3:55 PM, Greg Swallow wrote:
> Depending on the distribution of Linux you're using, there's a good
> chance you'll need to modify/create the 'terminfo' file. Rather than
> run through the steps here, check this link out:>
> https://bytemyvdu.wordpress.com/2016/09/03/tandy-trs80-m100-serial-terminal/>
> As long as you have a standard terminal (CrossTalk) cable, you should
> be fine.>
> God Luck,
>
> GregS <><
>
> ----- Original Message -----
> From: "Peter Vollan" <dprogra...@gmail.com>
> To: m...@bitchin100.com
> Sent: Wednesday, July 11, 2018 2:59:09 PM
> Subject: [M100] linux
>
> How do I get a linux terminal on my model 100? I already have the
> serial to> USB cable working.
