Thanks, Dan! That cable would certainly fit an M100, but Brian is looking for just a shell to go around a bare connector; maybe he wants to make a one-piece USB to 25-pin cable with the USB electronics inside the DB25 connector.
In any case, the problem is that unlike molded cables most shells have lips on the sides that grip the connector, and those lips keep the connector from fitting into the recessed connector on an M100. m ----- Original Message ----- From: Dan Higdon To: m...@bitchin100.com Sent: Saturday, June 01, 2019 3:35 PM Subject: Re: [M100] dsub 25 hood that fits I bought one of these from Amazon, and it fits my 102. But it's going to my PC's COM port, not a USB port, so maybe this isn't what people are looking for. StarTech.com 10 ft Cross Wired DB9 to DB25 Serial Null Modem Cable - F/M On Sat, Jun 1, 2019 at 2:19 PM Mike Stein <mhs.st...@gmail.com> wrote: Looks like a worthy 3d printing project... ----- Original Message ----- From: Mike Stein To: m...@bitchin100.com Sent: Saturday, June 01, 2019 2:36 PM Subject: Re: [M100] dsub 25 hood that fits This is what I use(d) but it appears that Souriau hasn't made them for quite a while: Why not just stick one of these on a 'normal' shell: m ----- Original Message ----- From: Brian White To: Model 100 Discussion Sent: Saturday, June 01, 2019 1:19 PM Subject: [M100] dsub 25 hood that fits Anyone ever find a dsub 25 hood that fits in the serial port openeing on M100? -- bkw