That's a good sign. One more thing to try. Go to TELCOM STAT 98n1E <ENTER> TERM <ENTER> F2 LOAD.DO <ENTER>
Now go to mComm and push the load DOS button, select TS-DOS 100 and press OK. You should see all the loader code come into TELCOM. It takes quite a bit longer this way but when done press F2 to stop the download. At that point, you should be able to load that DO into BASIC and run it. If that doesn't work, then there is something in v9 of Android that is preventing mComm from opening one of the files stored in it's resource files folder. If that's the case, then I've got some work to do. Kurt On Wed, Jun 24, 2020, at 8:44 AM, Gregory McGill wrote: > that works fine.. was able to go in and go to modem vm and then back to tpdd > > tpdd works fine, it's just the push function.. > > Greg > > On Wed, Jun 24, 2020 at 5:18 AM Kurt McCullum <ku...@fastmail.com> wrote: >> __ >> Something to try to see if things are working. >> >> Go to TELCOM >> STAT 98n1E <ENTER> >> TERM <ENTER> >> <ENTER> >> <ENTER> >> >> At this point you should get a message that says you are in virtual modem >> mode. If you don't see this message, something is definitely not working. >> >> Remember to exit out of the virtual modem mode with >> TPDD <ENTER> >> >> Then exit TELCOM. >> >> Kurt >> >> On Tue, Jun 23, 2020, at 8:02 PM, Gregory McGill wrote: >>> ok great, yes with other android boxes it worked fine.. just this new one >>> is the issue. >>> >>> >>> On Tue, Jun 23, 2020 at 7:45 PM Kurt McCullum <ku...@fastmail.com> wrote: >>>> __ >>>> Greg, >>>> >>>> I just finished some testing. I was using a v6 Android TV box, with an >>>> FTDI usb to serial adapter. On the other end was my NEC 8201. >>>> With mComm running, I pressed the Load Dos button and selected TS-DOS NEC. >>>> Then I went to Basic and put the command in that was on the TV screen and >>>> hit enter. Then I pressed OK on the TV screen (clicked with a mouse). >>>> mComm started sending and TS-DOS was loaded on my device. >>>> >>>> I don't have a 100 or 102 here but I was able to use TELCOM and download >>>> the loader for TS-DOS by selecting a different version from mComm. >>>> >>>> At this point I'm not sure what is happening on your end. I'll see if >>>> there is any way to catch the error and display it. >>>> >>>> I'll keep you posted. >>>> >>>> Kurt >>>> >>>> On Tue, Jun 23, 2020, at 10:14 AM, Gregory McGill wrote: >>>>> yep..also it works for browsing with ts-dos.. just not to push it to >>>>> another 100/200 >>>>> >>>>> On Tue, Jun 23, 2020 at 8:51 AM Kurt McCullum <ku...@fastmail.com> wrote: >>>>>> __ >>>>>> Okay thanks. That rules out a bad cable so it's definitely something >>>>>> with the Android mComm. I've got my dev machine with me but limited >>>>>> cables. I think I've got enough to test but I've got to dig it out of >>>>>> some boxes. >>>>>> >>>>>> Kurt >>>>>> >>>>>> On Tue, Jun 23, 2020, at 8:41 AM, Gregory McGill wrote: >>>>>>> thanks! >>>>>>> >>>>>>> same one i've been using all the time with many other boxes also works >>>>>>> fine on my 102 with windows mcomm >>>>>>> https://smile.amazon.com/gp/product/B00AHYJWWG/ >>>>>>> >>>>>>> Greg >>>>>>> >>>>>>> On Tue, Jun 23, 2020 at 8:39 AM Kurt McCullum <ku...@fastmail.com> >>>>>>> wrote: >>>>>>>> __ >>>>>>>> Greg, >>>>>>>> >>>>>>>> I'll have to check that. Unfortunately most of my equipment is in >>>>>>>> storage right now due to being in the middle of a move. >>>>>>>> I do have an NEC 8201a that I may be able to test with. I'll get back >>>>>>>> to you on it. >>>>>>>> >>>>>>>> Quick question. What type of USB to serial adapter are you using? >>>>>>>> >>>>>>>> Kurt McCullum >>>>>>>> >>>>>>>> On Tue, Jun 23, 2020, at 8:19 AM, Gregory McGill wrote: >>>>>>>>> Trying to push ts-dos from mcomm android 181 on a android 9 tv box i >>>>>>>>> just got. whenever i hit ok to send the file it just seems to crash >>>>>>>>> mcomm and jumps out of it.. >>>>>>>>> >>>>>>>>> Greg >>>>>>>> >>>>>> >>>> >>
