yeah soon as i hit ok it bombs out on the android box back to the home screen.. nothing sent here's the software about page on my device: https://photos.app.goo.gl/Gxfhxqy5V3Y9rkLe7
Greg On Wed, Jun 24, 2020 at 8:52 AM Kurt McCullum <ku...@fastmail.com> wrote: > That's a good sign. One more thing to try. > Go to TELCOM > STAT 98n1E <ENTER> > TERM <ENTER> > F2 > LOAD.DO <ENTER> > > Now go to mComm and push the load DOS button, select TS-DOS 100 and press > OK. You should see all the loader code come into TELCOM. It takes quite a > bit longer this way but when done press F2 to stop the download. At that > point, you should be able to load that DO into BASIC and run it. > > If that doesn't work, then there is something in v9 of Android that is > preventing mComm from opening one of the files stored in it's resource > files folder. If that's the case, then I've got some work to do. > > Kurt > > On Wed, Jun 24, 2020, at 8:44 AM, Gregory McGill wrote: > > that works fine.. was able to go in and go to modem vm and then back to > tpdd > > tpdd works fine, it's just the push function.. > > Greg > > On Wed, Jun 24, 2020 at 5:18 AM Kurt McCullum <ku...@fastmail.com> wrote: > > > Something to try to see if things are working. > > Go to TELCOM > STAT 98n1E <ENTER> > TERM <ENTER> > <ENTER> > <ENTER> > > At this point you should get a message that says you are in virtual modem > mode. If you don't see this message, something is definitely not working. > > Remember to exit out of the virtual modem mode with > TPDD <ENTER> > > Then exit TELCOM. > > Kurt > > On Tue, Jun 23, 2020, at 8:02 PM, Gregory McGill wrote: > > ok great, yes with other android boxes it worked fine.. just this new one > is the issue. > > > On Tue, Jun 23, 2020 at 7:45 PM Kurt McCullum <ku...@fastmail.com> wrote: > > > Greg, > > I just finished some testing. I was using a v6 Android TV box, with an > FTDI usb to serial adapter. On the other end was my NEC 8201. > With mComm running, I pressed the Load Dos button and selected TS-DOS NEC. > Then I went to Basic and put the command in that was on the TV screen and > hit enter. Then I pressed OK on the TV screen (clicked with a mouse). mComm > started sending and TS-DOS was loaded on my device. > > I don't have a 100 or 102 here but I was able to use TELCOM and download > the loader for TS-DOS by selecting a different version from mComm. > > At this point I'm not sure what is happening on your end. I'll see if > there is any way to catch the error and display it. > > I'll keep you posted. > > Kurt > > On Tue, Jun 23, 2020, at 10:14 AM, Gregory McGill wrote: > > yep..also it works for browsing with ts-dos.. just not to push it to > another 100/200 > > On Tue, Jun 23, 2020 at 8:51 AM Kurt McCullum <ku...@fastmail.com> wrote: > > > Okay thanks. That rules out a bad cable so it's definitely something with > the Android mComm. I've got my dev machine with me but limited cables. I > think I've got enough to test but I've got to dig it out of some boxes. > > Kurt > > On Tue, Jun 23, 2020, at 8:41 AM, Gregory McGill wrote: > > thanks! > > same one i've been using all the time with many other boxes also works > fine on my 102 with windows mcomm > https://smile.amazon.com/gp/product/B00AHYJWWG/ > > Greg > > On Tue, Jun 23, 2020 at 8:39 AM Kurt McCullum <ku...@fastmail.com> wrote: > > > Greg, > > I'll have to check that. Unfortunately most of my equipment is in storage > right now due to being in the middle of a move. > I do have an NEC 8201a that I may be able to test with. I'll get back to > you on it. > > Quick question. What type of USB to serial adapter are you using? > > Kurt McCullum > > On Tue, Jun 23, 2020, at 8:19 AM, Gregory McGill wrote: > > Trying to push ts-dos from mcomm android 181 on a android 9 tv box i just > got. whenever i hit ok to send the file it just seems to crash mcomm and > jumps out of it.. > > Greg > > > > > > >
